LI ION charger 5Vout
SolderedElectronics·Li-ion-charger-BQ24295-with-5V-USB-output-board-hardware-design·CAD/V1.0.0/PANEL/LI_ION_charger_5Vout.kicad_pcb
About the LI ION charger 5Vout PCB
LI ION charger 5Vout is an open source PCB design by SolderedElectronics, published on GitHub under the TAPR-OHL-1.0 license. It is a 2-layer board measuring 190.8 × 166.4 mm, with 53 components from 30 distinct parts.
Other key parts include the NMOS-DUAL, BQ24295_RGET and SE5218. By type, the board carries 16 resistors, 12 relays, 9 capacitors, 6 jumpers, 3 ICs and 2 diodes.
It belongs with the power & battery designs in this gallery.
From the project
Hardware design, BOM, gerbers and 3D files for Li-ion-charger-BQ24295-with-5V-USB-output-board designed by Soldered Electronics.
The BQ24295 is a versatile Li-ion battery charger designed to provide efficient and reliable charging for single-cell lithium-ion or lithium-polymer batteries. It supports various charging modes, including constant current (CC) and constant voltage (CV) charging, to ensure the battery is charged quickly and safely.
The BQ24295 charger operates on a wide input voltage range, typically from 4.35V to 17V, allowing it to be powered by a variety of power sources, including USB ports and AC adapters. It also features integrated power path management, which allows simultaneous charging of the…

Main components on the LI ION charger 5Vout
LI ION charger 5Vout bill of materials (BOM)
53 components, 30 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | NMOS-DUAL | SOT-363 | U1 |
| 1 | BQ24295_RGET | BQ24295RGET | U2 |
| 1 | SE5218 | SOT-23-5 | U3 |
| 4 | HOLE_3.2MM HOLE_3.2mm | HOLE_3.2mm | H1, H2, H3, H4 |
| 2 | SMD_JUMPER_3_PAD_TRACE | SMD_JUMPER_3_PAD_TRACE | JP1, JP3 |
| 2 | SMD-JUMPER-CONNECTED_TRACE_SLODERMASK | SMD-JUMPER-CONNECTED_TRACE_SLODERMASK | JP2, JP6 |
| 1 | SMD-JUMPER-CONNECTED | SMD_JUMPER_CONNECTED | JP4 |
| 1 | SMD_JUMPER | SMD_JUMPER | JP5 |
| 2 | HEADER_MALE_2X1 | HEADER_MALE_2X1 | K1, K10 |
| 4 | HEADER_MALE_1X1 | HEADER_MALE_1X1 | K2, K3, K8, K9 |
| 1 | U262-161N-4BVC11 | U262-161N-4BVC11 | K4 |
| 2 | easyC-SMD | easyC-connector | K5, K11 |
| 1 | HEADER_MALE_4X1 | HEADER_MALE_4X1 | K6 |
| 1 | JST-2PIN-SMD JST-2pin-SMD | JST-2pin-SMD | K7 |
| 1 | USB_A_FEMALE_CONNECTOR | USB_A_FEMALE_CONECTOR | K12 |
| 1 | red | 0402LED | D1 |
| 1 | purple | 0402LED | D2 |
| 1 | SRN5020TA__2R2M | SRN5020TA-2R2M | L1 |
| 1 | CL10B105KO8NNNL | 0603C | C1 |
| 1 | EMK316BB7226ML-T | 1206C | C2 |
Show 10 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | GRM21BR71C475KE51K | 0805C | C3 |
| 1 | CL10B473KO8NNNC | 0603C | C4 |
| 3 | CL31B106MOHNNNE | 1206C | C5, C6, C7 |
| 2 | 2.2UF 2.2uF | 0603C | C8, C9 |
| 3 | 5.1K 5.1k | 0603R | R1, R12, R14 |
| 8 | 10K 10k | 0603R | R2, R3, R5, R6, R7, R8, R9, R10 |
| 1 | 33K 33k | 0603R | R4 |
| 2 | 2K2 2k2 | 0402R | R11, R16 |
| 1 | 150R | 0603R | R13 |
| 1 | 1k | 0603R | R15 |
LI ION charger 5Vout design files
The KiCad project lives in the SolderedElectronics/Li-ion-charger-BQ24295-with-5V-USB-output-board-hardware-design repository on GitHub; these links point at the commit this page was built from.
LI ION charger 5Vout: common questions
How big is the LI ION charger 5Vout PCB?
The LI ION charger 5Vout measures 190.8 × 166.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the LI ION charger 5Vout?
53 components, from 30 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the LI ION charger 5Vout design files?
From the SolderedElectronics/Li-ion-charger-BQ24295-with-5V-USB-output-board-hardware-design repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the LI ION charger 5Vout design in my own project?
Yes, under the terms of its TAPR-OHL-1.0 license, which SolderedElectronics chose for the repository.
More boards in Li-ion-charger-BQ24295-with-5V-USB-output-board-hardware-design
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k