Obstacle sensor qwiic hardware design
SolderedElectronics·Obstacle-sensor-qwiic-hardware-design·CAD/V1.0.0/Obstacle_sensor_easyC.kicad_pcb
About the Obstacle sensor qwiic hardware design PCB
Obstacle sensor qwiic hardware design is an open source AVR/Arduino PCB design by SolderedElectronics, published on GitHub under the TAPR-OHL-1.0 license. It is a 2-layer board measuring 38 × 22 mm, with 20 components from 13 distinct parts.
Its main chip is the ATTINY404-SSNR, from the AVR/Arduino family. Other key parts include the TCRT5000L and LM393. By type, the board carries 7 resistors, 4 relays, 3 ICs, 3 capacitors and 1 diode.
It belongs with the sensors designs in this gallery.
From the project
Hardware design, BOM, gerbers and 3D files for Obstacle-sensor-qwiic designed by Soldered Electronics.
The TCRT5000 is an infrared (IR) reflective sensor module that is commonly used for proximity sensing and line-following applications. It consists of an infrared emitter and a phototransistor placed side by side in a compact package. The emitter emits infrared light, which gets reflected off nearby objects, and the phototransistor detects the intensity of the reflected light.

Main components on the Obstacle sensor qwiic hardware design
Obstacle sensor qwiic hardware design bill of materials (BOM)
20 components, 13 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TCRT5000L tcrt5000L | TCRT5000L | U1 |
| 1 | LM393 | SOIC−8 | U2 |
| 1 | ATTINY404-SSNR | SOIC-14 | U3 |
| 2 | HOLE_3.2MM HOLE_3.2mm | HOLE_3.2mm | H1, H2 |
| 2 | easyC-SMD | easyC-connector | K1, K3 |
| 1 | HEADER-UPDI | HEADER-UPDI | K2 |
| 1 | DSHP03TS-S | DSHP03TS-S | K4 |
| 1 | purple | 0402LED | D1 |
| 3 | 0.1UF 0.1uF | 0603C | C1, C2, C3 |
| 1 | TC33X-2-103E tc33x-2-103e | tc33x-2-103e | R1 |
| 1 | 1k | 0603R | R2 |
| 4 | 10K 10k | 0603R | R3, R4, R6, R7 |
| 1 | 1k | 0402R | R5 |
Obstacle sensor qwiic hardware design design files
The KiCad project lives in the SolderedElectronics/Obstacle-sensor-qwiic-hardware-design repository on GitHub; these links point at the commit this page was built from.
Obstacle sensor qwiic hardware design: common questions
What microcontroller does the Obstacle sensor qwiic hardware design use?
The Obstacle sensor qwiic hardware design is built around the ATTINY404-SSNR, from the AVR/Arduino family.
How big is the Obstacle sensor qwiic hardware design PCB?
The Obstacle sensor qwiic hardware design measures 38 × 22 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Obstacle sensor qwiic hardware design?
20 components, from 13 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Obstacle sensor qwiic hardware design design files?
From the SolderedElectronics/Obstacle-sensor-qwiic-hardware-design repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Obstacle sensor qwiic hardware design design in my own project?
Yes, under the terms of its TAPR-OHL-1.0 license, which SolderedElectronics chose for the repository.
Can I test firmware for the Obstacle sensor qwiic hardware design without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k