Pir na easyC breakout

SolderedElectronics·PIR-movement-sensor-board-with-easyC-hardware-design·CAD/V1.0.0/Pir na easyC breakout.kicad_pcb

Pir na easyC breakout layout, top view — open source AVR/Arduino board by SolderedElectronics

About the Pir na easyC breakout

Pir na easyC breakout is an open source AVR/Arduino PCB design by SolderedElectronics, published on GitHub under the TAPR-OHL-1.0 license. It is a 2-layer board measuring 38 × 22 mm, with 12 components from 10 distinct parts.

Its main chip is the ATTINY404-SSNR, from the AVR/Arduino family. Other key parts include the AM312. By type, the board carries 4 relays, 2 ICs, 1 diode, 1 capacitor and 1 resistor.

It belongs with the sensors and dev boards & breakouts designs in this gallery.

From the project

Hardware design, BOM, gerbers and 3D files for PIR-movement-sensor-board-with-easyC designed by Soldered Electronics.

All Soldered hardware is designed in KiCAD, and repositories are organized in the following way:

- CAD folder - contains KiCAD files (Schematics, Board, Panel Board), organized by version. Change log lists all changes between versions. - OUTPUTS - contains useful files, such as Bill of Materials (BOM), PDF of schematics, 3D .step file of the board and gerber files, organized by version.

Main components on the Pir na easyC breakout

Pir na easyC breakout bill of materials (BOM)

12 components, 10 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
AM312
U2
1
ATTINY404-SSNR
U3
2
HOLE_3.2MM
HOLE_3.2mm
H1, H2
1
—
HOLE_L1
2
easyC-SMD
K1, K3
1
HEADER-UPDI
K2
1
DSHP03TS-S
K4
1
Purple
D1
1
100N
100n
C3
1
2K2
2k2
R1

Pir na easyC breakout design files

The KiCad project lives in the SolderedElectronics/PIR-movement-sensor-board-with-easyC-hardware-design repository on GitHub; these links point at the commit this page was built from.

Pir na easyC breakout: common questions

What microcontroller does the Pir na easyC breakout use?

The Pir na easyC breakout is built around the ATTINY404-SSNR, from the AVR/Arduino family.

How big is the Pir na easyC breakout?

The Pir na easyC breakout measures 38 × 22 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Pir na easyC breakout?

12 components, from 10 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Pir na easyC breakout design files?

From the SolderedElectronics/PIR-movement-sensor-board-with-easyC-hardware-design repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Pir na easyC breakout design in my own project?

Yes, under the terms of its TAPR-OHL-1.0 license, which SolderedElectronics chose for the repository.

Can I test firmware for the Pir na easyC breakout without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in PIR-movement-sensor-board-with-easyC-hardware-design

Similar boards