LM393 breakout

SolderedElectronics·Simple-light-sensor-board-hardware-design·CAD/V1.0.0/LM393_breakout.kicad_pcb

LM393 breakout layout, top view — open source board by SolderedElectronics

About the LM393 breakout

LM393 breakout is an open source PCB design by SolderedElectronics, published on GitHub under the TAPR-OHL-1.0 license. It is a 2-layer board measuring 22 × 22 mm, with 13 components from 10 distinct parts.

Other key parts include the LM393. By type, the board carries 4 resistors, 3 relays, 2 capacitors, 1 IC and 1 diode.

It belongs with the sensors and dev boards & breakouts designs in this gallery.

From the project

Hardware design, BOM, gerbers and 3D files for Simple-light-sensor-board designed by Soldered Electronics.

Light is one of the most important things in the life of most living beings. Because of this, it is common to work with light sensors when learning about electronics. The simple light sensor features a light-dependent resistor (LDR) and a sensor on a small breakout board for easier connection. As the name suggests, the LDR will change its resistance depending on the amount of light it’s exposed to. The amount of light and resistance are inversely proportional. The more light it’s exposed to, the less resistance it will have. Thus, if there’s more light, the board will have a resistance of a…

LM393 breakout, from the project README
From the project README

Main components on the LM393 breakout

LM393 breakout bill of materials (BOM)

13 components, 10 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
LM393
U1
2
HOLE_3.2MM
HOLE_3.2mm
H1, H2
1
HEADER_MALE_2X1
K1
1
HEADER_MALE_4X1
K2
1
JST-SH_2PIN_1MM_C145954
JST-SH_2pin_1mm_C145954
K3
1
purple
D1
2
0.1UF
0.1uF
C1, C2
2
10K
10k
R1, R2
1
2K2
1k
R3
1
TC33X-2-103E
tc33x-2-103e
R4

LM393 breakout design files

The KiCad project lives in the SolderedElectronics/Simple-light-sensor-board-hardware-design repository on GitHub; these links point at the commit this page was built from.

LM393 breakout: common questions

How big is the LM393 breakout?

The LM393 breakout measures 22 × 22 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the LM393 breakout?

13 components, from 10 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the LM393 breakout design files?

From the SolderedElectronics/Simple-light-sensor-board-hardware-design repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the LM393 breakout design in my own project?

Yes, under the terms of its TAPR-OHL-1.0 license, which SolderedElectronics chose for the repository.

More boards in Simple-light-sensor-board-hardware-design

Similar boards