USB-UART-FT232L-converter board hardware design
SolderedElectronics·USB-UART-FT232L-converter-board-hardware-design·CAD/V1.1.1/USB-UART_FT232L_converter_board.kicad_pcb
About the USB-UART-FT232L-converter board hardware design
USB-UART-FT232L-converter board hardware design is an open source PCB design by SolderedElectronics, published on GitHub under the TAPR-OHL-1.0 license. It is a 2-layer board measuring 38 × 38 mm, with 28 components from 21 distinct parts.
Other key parts include the FT_232RL and SE5218. By type, the board carries 5 capacitors, 5 resistors, 4 relays, 3 jumpers, 3 diodes and 2 ICs.
It belongs with the usb & debug tools designs in this gallery.
From the project
Hardware design, BOM, gerbers and 3D files for USB-UART-FT232L-converter-board designed by Soldered Electronics.
All Soldered Electronics hardware designed in KiCAD, and repositories are organized in the following way:
- CAD folder - contains KiCAD files (Schematics, Board, Panel Board), sorted by version. Change log lists all changes between versions. - OUTPUTS - contains useful files, such as Bill of Materials (BOM), PDF of schematics, 3D .step file of the board and gerber files, sorted by version. - OUTPUTS -> Compliance - Certificates and useful legal stuff.

Main components on the USB-UART-FT232L-converter board hardware design
USB-UART-FT232L-converter board hardware design bill of materials (BOM)
28 components, 21 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | FT_232RL | FT232RL | U1 |
| 1 | SE5218 | SOT-23-5 | U2 |
| 1 | 1206FUSE-500MA 1206FUSE-500mA | 1206FUSE | F1 |
| 4 | HOLE_3.2MM HOLE_3.2mm | HOLE_3.2mm | H1, H2, H3, H4 |
| 2 | SMD-JUMPER-CONNECTED_TRACE_SLODERMASK | SMD-JUMPER-CONNECTED_TRACE_SLODERMASK | JP1, JP3 |
| 1 | SMD_JUMPER | SMD_JUMPER | JP2 |
| 1 | U262-161N-4BVC11 | U262-161N-4BVC11 | K1 |
| 1 | HEADER_MALE_9X1 | HEADER_MALE_9X1 | K2 |
| 1 | HEADER_MALE_8X1 | HEADER_MALE_8X1 | K3 |
| 1 | FTDI_HEADER | HEADER_MALE_6X1 | K4 |
| 1 | SS-3292S-L1 | SS-3292S-L1 | S1 |
| 1 | white | 0402LED | D1 |
| 1 | blue | 0402LED | D2 |
| 1 | purple | 0402LED | D3 |
| 2 | 2.2UF 2u2 | 0603C | C1, C4 |
| 1 | 100NF 100n | 0603C | C2 |
| 1 | 10UF 10u | 1206C | C3 |
| 1 | 0.1UF 100n | 0603C | C5 |
| 2 | 5.1K 5k1 | 0603R | R1, R2 |
| 2 | 100R 100 | 0603R | R3, R4 |
Show 1 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 2K2 2k2 | 0402R | R5 |
USB-UART-FT232L-converter board hardware design design files
The KiCad project lives in the SolderedElectronics/USB-UART-FT232L-converter-board-hardware-design repository on GitHub; these links point at the commit this page was built from.
USB-UART-FT232L-converter board hardware design: common questions
How big is the USB-UART-FT232L-converter board hardware design?
The USB-UART-FT232L-converter board hardware design measures 38 × 38 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the USB-UART-FT232L-converter board hardware design?
28 components, from 21 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the USB-UART-FT232L-converter board hardware design design files?
From the SolderedElectronics/USB-UART-FT232L-converter-board-hardware-design repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the USB-UART-FT232L-converter board hardware design design in my own project?
Yes, under the terms of its TAPR-OHL-1.0 license, which SolderedElectronics chose for the repository.
Similar boards
USB Hub Test
osy
50 × 50 mm85 parts4LCC-BY-4.0703XG Station Power
osy
54.3 × 91 mm9 parts2LCC-BY-4.0703FW-EC-DongleHiderPlus
LeoDJ
28.2 × 26.1 mm14 parts4LCERN-OHL-W-2.0497Adapter tsop48
bbogush
48 × 33 mm3 parts2LGPL-3.0389Adapter tsop48 solder
bbogush
48 × 33 mm3 parts2LGPL-3.0389Adapter soic8 solder
bbogush
48 × 20 mm3 parts2LGPL-3.0389