2 open source boards using the FT_232RL

Real designs built with the FT_232RL, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filters|Most starred

The FT_232RL in open source designs

The gallery holds 2 open source boards using the FT_232RL from 2 GitHub repositories; a typical one measures about 38 × 38 mm and carries around 27 components.

100% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.

The most starred is Soldered-USB-UART-FT232L-hardware design by test-gh-syncer2.

Parts used alongside the FT_232RL

What boards using the FT_232RL are built for

FT_232RL: common questions

Where can I find a FT_232RL reference design?

Each of the 2 boards on this page is a real design using the FT_232RL. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How big is a typical board using the FT_232RL?

The median is 38 × 38 mm, and 100% are two-layer designs.

What is the most popular open source board using the FT_232RL?

By GitHub stars, Soldered-USB-UART-FT232L-hardware design by test-gh-syncer2, with 1 stars.

Can I simulate one of these boards using the FT_232RL before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part