Voltage---current sensor-INA219-breakout hardware design
SolderedElectronics·Voltage---current-sensor-INA219-breakout-hardware-design·CAD/V1.0.0/INA219_breakout.kicad_pcb
About the Voltage---current sensor-INA219-breakout hardware design
Voltage---current sensor-INA219-breakout hardware design is an open source PCB design by SolderedElectronics, published on GitHub under the TAPR-OHL-1.0 license. It is a 2-layer board measuring 38 × 22 mm, with 16 components from 10 distinct parts.
Other key parts include the INA219. By type, the board carries 5 resistors, 4 relays, 3 jumpers, 1 IC and 1 capacitor.
It belongs with the sensors and dev boards & breakouts designs in this gallery.
From the project
Hardware design, BOM, gerbers and 3D files for Voltage-&-current-sensor-INA219-breakout designed by Soldered Electronics.
The INA219 is a digital device that allows the measurement of current, voltage, and therefore power. Simply, connect wire serial through this device and it will give all the information provided via I2C communication. It is very simple and reliable to use. It has a jumper for making changes to the I2C address so you can connect more than one INA219 to single microcontroller.

Main components on the Voltage---current sensor-INA219-breakout hardware design
Voltage---current sensor-INA219-breakout hardware design bill of materials (BOM)
16 components, 10 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | INA219 | SOT23-8 | U1 |
| 2 | HOLE_3.2MM HOLE_3.2mm | HOLE_3.2mm | H1, H2 |
| 1 | SMD_JUMPER_3_PAD_TRACE | SMD_JUMPER_3_PAD_TRACE | JP1 |
| 2 | SMD_JUMPER | SMD_JUMPER | JP2, JP3 |
| 1 | TERMINAL_KF235-5.0-2P | TERMINAL_KF235-5.0-2P | K1 |
| 2 | easyC-SMD | easyC-connector | K2, K4 |
| 1 | HEADER_MALE_4X1 | HEADER_MALE_4X1 | K3 |
| 1 | 100NF 100nF | 0603C | C1 |
| 4 | 10K 10k | 0603R | R1, R2, R3, R4 |
| 1 | 0R1 | 1210R | R5 |
Voltage---current sensor-INA219-breakout hardware design design files
The KiCad project lives in the SolderedElectronics/Voltage---current-sensor-INA219-breakout-hardware-design repository on GitHub; these links point at the commit this page was built from.
Voltage---current sensor-INA219-breakout hardware design: common questions
How big is the Voltage---current sensor-INA219-breakout hardware design?
The Voltage---current sensor-INA219-breakout hardware design measures 38 × 22 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Voltage---current sensor-INA219-breakout hardware design?
16 components, from 10 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Voltage---current sensor-INA219-breakout hardware design design files?
From the SolderedElectronics/Voltage---current-sensor-INA219-breakout-hardware-design repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Voltage---current sensor-INA219-breakout hardware design design in my own project?
Yes, under the terms of its TAPR-OHL-1.0 license, which SolderedElectronics chose for the repository.
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kSensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2k