WiFi bit hardware design
SolderedElectronics·WiFi-bit-hardware-design·CAD/V1.1.1/WiFi_bit.kicad_pcb
About the WiFi bit hardware design PCB
WiFi bit hardware design is an open source ESP8266 PCB design by SolderedElectronics, published on GitHub under the TAPR-OHL-1.0 license. It is a 2-layer board measuring 70 × 38 mm, with 30 components from 18 distinct parts.
Its main chip is the ESP8266(ESP12-F), from the ESP8266 family. Other key parts include the SE5218. By type, the board carries 10 resistors, 6 relays, 4 capacitors, 3 jumpers, 2 ICs and 1 diode.
It belongs with the iot & wireless designs in this gallery.
From the project
Hardware design, BOM, gerbers and 3D files for WiFi-bit designed by Soldered Electronics.
Micro:bit is a very interesting board with lots of options that are used by many children in school or hobbyists, but who can say no to new features! So we decided to make a micro:bit add-on that will enable internet connection via WiFi! Finally, you’ll be able to connect your micro:bit projects to the Internet and to connect to the well known Internet of Things. WiFi:bit add-on is easy to use through a MakeBlock add-on or using completed Python examples.

Main components on the WiFi bit hardware design
WiFi bit hardware design bill of materials (BOM)
30 components, 18 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP8266(ESP12-F) | ESP 8266(ESP12-F) | U1 |
| 1 | SE5218 | SOT-23-5 | U2 |
| 4 | HOLE_3.2MM HOLE_3.2mm | HOLE_3.2mm | H1, H2, H3, H4 |
| 2 | SMD-JUMPER-CONNECTED | SMD_JUMPER_CONNECTED | JP1, JP2 |
| 1 | SMD-JUMPER-CONNECTED_TRACE_SLODERMASK | SMD-JUMPER-CONNECTED_TRACE_SLODERMASK | JP3 |
| 2 | easyC-SMD | easyC-connector | K1, K2 |
| 1 | HEADER_MALE_2X1 | HEADER_MALE_2X1 | K3 |
| 1 | HEADER_MALE_14X1 | HEADER_MALE_14X1 | K4 |
| 1 | U262-161N-4BVC11 | U262-161N-4BVC11 | K5 |
| 1 | MIC127-140-002 | MC127-140-002 | K6 |
| 1 | purple | 0402LED | D1 |
| 1 | 10UF 10uF | 1206C | C1 |
| 1 | 100NF 100nF | 0603C | C2 |
| 2 | 2.2UF 2.2uF | 0603C | C3, C4 |
| 6 | 10K 10k | 0603R | R1, R2, R3, R4, R5, R6 |
| 1 | 2K49 2k49 | 0603R | R7 |
| 1 | 2K2 2k2 | 0402R | R8 |
| 2 | 5.1K 5.1k | 0603R | R9, R10 |
WiFi bit hardware design design files
The KiCad project lives in the SolderedElectronics/WiFi-bit-hardware-design repository on GitHub; these links point at the commit this page was built from.
WiFi bit hardware design: common questions
What microcontroller does the WiFi bit hardware design use?
The WiFi bit hardware design is built around the ESP8266(ESP12-F), from the ESP8266 family.
How big is the WiFi bit hardware design PCB?
The WiFi bit hardware design measures 70 × 38 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the WiFi bit hardware design?
30 components, from 18 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the WiFi bit hardware design design files?
From the SolderedElectronics/WiFi-bit-hardware-design repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the WiFi bit hardware design design in my own project?
Yes, under the terms of its TAPR-OHL-1.0 license, which SolderedElectronics chose for the repository.
Can I test firmware for the WiFi bit hardware design without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP8266 firmware against it before you order a PCB.
Similar boards
ESP8266
ESP8266ControllerCircuit
stuartpittaway
75 × 30 mm20 parts2LCC-BY-NC-4.01.1kESP8266
HASwitchPlate
aderusha
60 × 40 mm8 parts2LMIT738ESP8266
RatGDO-OpenSource-Bare-ESP8266
Kaldek
55 × 82.7 mm20 parts2LMIT506ESP8266
RatGDO-OpenSource-D1Mini-ESP8266
Kaldek
47.8 × 63.3 mm12 parts2LMIT506ESP8266
Goatgdo
Kaldek
32.9 × 53.3 mm23 parts2LMIT506ESP8266
Iaq board
nkitanov
70.1 × 43.2 mm17 parts2LNo license398