3D-clock
SolidElectronics·3D-clock·KiCad/3D clock.kicad_pcb
About the 3D-clock PCB
3D-clock is an open source ESP8266 PCB design by SolidElectronics, published on GitHub under the MIT license. It is a 2-layer board measuring 68 × 100 mm, with 44 components from 14 distinct parts.
Its main chip is the ESP-12F, from the ESP8266 family. Other key parts include the AMS1117-3.3. By type, the board carries 16 diodes, 12 capacitors, 8 resistors, 5 connectors, 2 ICs and 1 switch.
Main components on the 3D-clock
3D-clock bill of materials (BOM)
44 components, 14 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U1 |
| 1 | ESP-12F | ESP-12E | U2 |
| 1 | USB_C_Receptacle_PowerOnly_6P | USB_C_Receptacle_HRO_TYPE-C-31-M-17 | J1 |
| 2 | Conn_01x04 | PinHeader_1x04_P2.54mm_Vertical | J2, J3 |
| 1 | Left | PinHeader_1x04_P2.54mm_Vertical | J4 |
| 1 | Right | PinHeader_1x04_P2.54mm_Vertical | J5 |
| 1 | SW_Push | SW_PUSH_6mm | SW1 |
| 16 | SK6812 | LED_SK6812_PLCC4_5.0x5.0mm_P3.2mm | D1, D2, D3, D4, D5, D6, D7, D8 +8 |
| 10 | C | C_1206_3216Metric | C1, C2, C3, C4, C5, C6, C7, C8 +2 |
| 1 | 22uF | CP_Radial_D5.0mm_P2.00mm | C10 |
| 1 | 10uF | C_1206_3216Metric | C11 |
| 2 | 5.1k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R2 |
| 5 | 10k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R3, R4, R5, R6, R8 |
| 1 | A9050 | R_LDR_5.0x4.1mm_P3mm_Vertical | R7 |
3D-clock design files
The KiCad project lives in the SolidElectronics/3D-clock repository on GitHub; these links point at the commit this page was built from.
- LayoutKiCad/3D clock.kicad_pcb
- SchematicKiCad/3D clock.kicad_sch
3D-clock: common questions
What microcontroller does the 3D-clock use?
The 3D-clock is built around the ESP-12F, from the ESP8266 family.
How big is the 3D-clock PCB?
The 3D-clock measures 68 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the 3D-clock?
44 components, from 14 distinct parts. The full bill of materials is listed on this page.
Where can I download the 3D-clock design files?
From the SolidElectronics/3D-clock repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the 3D-clock design in my own project?
Yes, under the terms of its MIT license, which SolidElectronics chose for the repository.
Can I test firmware for the 3D-clock without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP8266 firmware against it before you order a PCB.
Similar boards
ESP8266
ESP8266ControllerCircuit
stuartpittaway
75 × 30 mm20 parts2LCC-BY-NC-4.01.1kESP8266
HASwitchPlate
aderusha
60 × 40 mm8 parts2LMIT738ESP8266
RatGDO-OpenSource-Bare-ESP8266
Kaldek
55 × 82.7 mm20 parts2LMIT506ESP8266
RatGDO-OpenSource-D1Mini-ESP8266
Kaldek
47.8 × 63.3 mm12 parts2LMIT506ESP8266
Goatgdo
Kaldek
32.9 × 53.3 mm23 parts2LMIT506ESP8266
Iaq board
nkitanov
70.1 × 43.2 mm17 parts2LNo license398