Logitech G11

SolidElectronics·Logitech_G11·KiCad/Logitech_G11.kicad_pcb

Logitech G11 PCB layout, top view — open source RP2040/RP2350 board by SolidElectronics

About the Logitech G11 PCB

Logitech G11 is an open source RP2040/RP2350 PCB design by SolidElectronics, published on GitHub under the MIT license. It is a 2-layer board measuring 197 × 37 mm, with 112 components from 23 distinct parts.

Its main chip is the RP2040-Zero, from the RP2040/RP2350 family. Other key parts include the 74HC595 and 74HC165. By type, the board carries 48 resistors, 26 diodes, 9 transistors, 9 connectors, 7 ICs and 7 capacitors.

It belongs with the keyboards designs in this gallery.

From the project

QMK conversion for Logitech G11 keyboard

Full replacement PCB for a Logitech G11 keyboard to have it run QMK and restore the functionality of the macro keys after the original software stopped working. Uses an RP2040-zero with a USB-C connector, mostly lined up with one of the original USB holes on the back. Requires some very minimal trimming of the plastic to get the connector in, and I couldn't preserve the original USB-A ports, there was simply no room on the PCB to fit a controller for that.

Main components on the Logitech G11

Logitech G11 bill of materials (BOM)

112 components, 23 distinct parts.

QtyPartRefs
3
74HC595
U1, U2, U3
4
74HC165
U4, U5, U6, U7
1
2N7002
Q1
8
2N7002
Q2, Q3, Q4, Q5, Q6, Q7, Q8, Q9
1
row-A
J1
1
col-a
J2
1
row-B
J3
1
col-b
J4
1
ENCODER
J5
1
MACRO_LED
J6
1
STATE_LED
J7
1
BACKLIGHT
J8
1
macro_row_col
J10
1
RP2040-Zero
RZ1
4
SW_Push
SW1, SW2, SW3, SW4
1
SW_SPDT
SW5
26
1N4148W
D1, D2, D3, D4, D5, D6, D7, D8 +18
7
C
C1, C2, C3, C4, C5, C6, C7
1
1k
R1
7
R
R2, R3, R4, R5, R6, R7, R8
Show 3 more
QtyPartRefs
32
10k
R9, R10, R11, R12, R13, R14, R15, R16 +24
1
100
R41
7
330
R42, R43, R44, R45, R46, R47, R48

Logitech G11 design files

The KiCad project lives in the SolidElectronics/Logitech_G11 repository on GitHub; these links point at the commit this page was built from.

Logitech G11: common questions

What microcontroller does the Logitech G11 use?

The Logitech G11 is built around the RP2040-Zero, from the RP2040/RP2350 family.

How big is the Logitech G11 PCB?

The Logitech G11 measures 197 × 37 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Logitech G11?

112 components, from 23 distinct parts. The full bill of materials is listed on this page.

Where can I download the Logitech G11 design files?

From the SolidElectronics/Logitech_G11 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Logitech G11 design in my own project?

Yes, under the terms of its MIT license, which SolidElectronics chose for the repository.

Can I test firmware for the Logitech G11 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards