TetraVCA
solisynth·tetra-vca·tetra-vca-main-pcb/TetraVCA.kicad_pcb
About the TetraVCA PCB
TetraVCA is an open source PCB design by solisynth, published on GitHub under the Custom license license. It is a 2-layer board measuring 122 × 124 mm, with 184 components from 32 distinct parts.
Other key parts include the TL074 and SSM2164. By type, the board carries 86 resistors, 44 capacitors, 19 connectors, 9 ICs, 9 diodes and 4 switches.
It belongs with the audio designs in this gallery.
From the project
Quad VCA and mixer for Eurorack in 12 HP, based on the SSM2164. Open hardware, KiCad.
TETRA VCA has four voltage-controlled amplifiers in 12 HP, built around the SSM2164 quad VCA chip. Each channel has a level knob, a CV input with an amount knob and a switch to use it as an attenuator or an attenuverter, and a knob that blends the response from linear to exponential, so it works just as well for shaping envelopes on audio as for processing CV.

Main components on the TetraVCA
TetraVCA bill of materials (BOM)
184 components, 32 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 7 | TL074 | SOIC-14_3.9x8.7mm_P1.27mm | U1, U2, U3, U4, U5, U6, U7 |
| 2 | SSM2164 ssm2164 | SOIC-16_3.9x9.9mm_P1.27mm | U8, U9 |
| 12 | PJ398SM thonkiconn | thonkiconn | CON1, CON2, CON3, CON4, CON5, CON6, CON7, CON8 +4 |
| 1 | CONN_01X17_FEMALE Conn_01x17_Female | PinSocket_1x17_P2.54mm_Vertical | J1 |
| 1 | CONN_01X17_MALE Conn_01x17_Male | PinHeader_1x17_P2.54mm_Vertical | J2 |
| 1 | CONN_01X08_FEMALE Conn_01x08_Female | PinSocket_1x08_P2.54mm_Vertical | J3 |
| 1 | CONN_01X08_MALE Conn_01x08_Male | PinHeader_1x08_P2.54mm_Vertical | J4 |
| 1 | CONN_01X12_FEMALE Conn_01x12_Female | PinSocket_1x12_P2.54mm_Vertical | J5 |
| 1 | CONN_01X12_MALE Conn_01x12_Male | PinHeader_1x12_P2.54mm_Vertical | J6 |
| 1 | 61201021621 CONN_02X05 | IDC-Header_2x05_P2.54mm_Vertical | P9 |
| 4 | RK09L1140A5E 10k | Potentiometer_Alps_RK09K_Single_Vertical | RV1, RV4, RV7, RV10 |
| 8 | PTV09A-4025U-B103 10k | Potentiometer_Alps_RK09K_Single_Vertical | RV2, RV3, RV5, RV6, RV8, RV9, RV11, RV12 |
| 4 | EG1248 SW_SPDT | Switch_EG1249 | SW1, SW2, SW3, SW4 |
| 1 | VAL** | mouse-bite-2mm-slot | mouse-bite-2mm-slot |
| 2 | D | D_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1, D2 |
| 2 | D_Schottky | D_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D3, D5 |
| 1 | LM4040CYM3-2.5-TR D_Schottky | TSOT-23 | D4 |
| 4 | LTL-10CHJ LED_Dual_2pin | LED_D3.0mm | D6, D7, D8, D9 |
| 4 | 22P 22p | C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C1, C7, C13, C19 |
| 8 | 560P 560p | C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C2, C4, C8, C10, C14, C16, C20, C22 |
Show 12 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 8 | 47P 47p | C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C3, C5, C9, C11, C15, C17, C21, C23 |
| 4 | 100P 100p | C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C6, C12, C18, C24 |
| 18 | 100N 100n | C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C25, C26, C27, C28, C29, C30, C31, C32 +10 |
| 2 | 47U 47u | CP_Elec_6.3x5.3 | C39, C40 |
| 4 | 14K 14k | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1, R19, R38, R57 |
| 38 | 100K 100k | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R2, R3, R4, R5, R6, R10, R12, R15 +30 |
| 4 | 49.9K 49.9k | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R7, R25, R44, R63 |
| 8 | 1k | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R8, R26, R45, R64, R83, R84, R85, R86 |
| 16 | 510 | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R9, R13, R14, R18, R27, R31, R32, R37 +8 |
| 4 | 20M | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R11, R29, R48, R67 |
| 11 | 5.1K 5.1k | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R16, R17, R33, R35, R36, R53, R54, R55 +3 |
| 1 | 24K 24k | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R76 |
TetraVCA design files
The KiCad project lives in the solisynth/tetra-vca repository on GitHub; these links point at the commit this page was built from.
TetraVCA: common questions
How big is the TetraVCA PCB?
The TetraVCA measures 122 × 124 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the TetraVCA?
184 components, from 32 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the TetraVCA design files?
From the solisynth/tetra-vca repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the TetraVCA design in my own project?
It is published under Custom license, which limits how it may be reused; read the license before building on it.
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687