Vcm machines
solomonwilsonr·vcm-machines·examples/sample-pcb/v1.0/sensor_node.kicad_pcb
About the Vcm machines PCB
Vcm machines is an open source ESP32 PCB design by solomonwilsonr, published on GitHub under the Apache-2.0 license. It is a 2-layer board measuring 105 × 40 mm, with 12 components from 11 distinct parts.
Its main chip is the ESP32-C3-MINI-1-N4, from the ESP32 family. Other key parts include the AMS1117-3.3. By type, the board carries 4 resistors, 3 capacitors, 2 ICs, 2 connectors and 1 diode.
It belongs with the sensors designs in this gallery.
From the project
VCM — version control for datacenter hardware. Commit a node's config, see what a change breaks, and trace which physical units are affected. Shared fleet of record on Appwrite TablesDB; semantic part search on VectorsDB.
A small ESP32-C3 based sensor node used by the VCM demo. Two revisions are provided:
- .kicadsch and .kicadpcb are hand-authored KiCad 8 S-expression files (generated programmatically, not exported from KiCad, and not opened in KiCad by the authors of this sample). The board is placement-only: no tracks or zones. The schematic ties pins to nets with global labels at the pin ends. - The ESP32-C3 module footprint has an abbreviated pad list (8 of the real pads). - bom/.csv is the bill of materials, vcm.json declares firmware links, tests and rails for the dependency graph, firmware/ is a stub…
Main components on the Vcm machines
Vcm machines bill of materials (BOM)
12 components, 11 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AMS1117-3.3 Advanced Monolithic Systems | SOT-223-3_TabPin2 | U1 |
| 1 | ESP32-C3-MINI-1-N4 ESP32-C3-MINI-1 Espressif | ESP32-C3-MINI-1 | U2 |
| 1 | PWR_IN | PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | SENSOR | PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | LTST-C190KGKT GREEN Lite-On | LED_0603_1608Metric | D1 |
| 1 | GRM21BR61A106KE19L 10uF Murata | C_0805_2012Metric | C1 |
| 1 | T491B226K010AT 22uF Kemet | CP_EIA-3528-21_Kemet-B | C2 |
| 1 | GRM188R71H104KA93D 100nF Murata | C_0603_1608Metric | C3 |
| 1 | RC0603FR-0710KL 10k Yageo | R_0603_1608Metric | R1 |
| 1 | RC0603FR-07330RL 330 Yageo | R_0603_1608Metric | R2 |
| 2 | RC0603FR-074K7L 4.7k Yageo | R_0603_1608Metric | R3, R4 |
Vcm machines design files
The KiCad project lives in the solomonwilsonr/vcm-machines repository on GitHub; these links point at the commit this page was built from.
Vcm machines: common questions
What microcontroller does the Vcm machines use?
The Vcm machines is built around the ESP32-C3-MINI-1-N4, from the ESP32 family.
How big is the Vcm machines PCB?
The Vcm machines measures 105 × 40 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Vcm machines?
12 components, from 11 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Vcm machines design files?
From the solomonwilsonr/vcm-machines repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Vcm machines design in my own project?
Yes, under the terms of its Apache-2.0 license, which solomonwilsonr chose for the repository.
Can I test firmware for the Vcm machines without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k