Kiboard
SomeonetookVeracles·Kiboard·PCB/Kiboard.kicad_sch
About the Kiboard PCB
Kiboard is an open source ESP32 PCB design by SomeonetookVeracles, published on GitHub. It is a board, with 178 components from 11 distinct parts.
Its main chip is the ESP32-S3-WROOM-2, from the ESP32 family. By type, the board carries 85 diodes, 84 switches, 3 capacitors, 3 resistors, 1 IC and 1 connector.
It belongs with the keyboards designs in this gallery.
From the project
A Keyboard with a screen I designed for hack club grounded
Main components on the Kiboard
Kiboard bill of materials (BOM)
178 components, 11 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-S3-WROOM-2 | ESP32-S3-WROOM-2 | U2 |
| 1 | USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_G-Switch_GT-USB-7010ASV | J1 |
| 1 | Rst | RST1 | |
| 84 | SW_Push_45deg | SW_Hotswap_Kailh_Choc_V1V2 | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +76 |
| 84 | 1N4148W | D_SOD-123 | D1, D3, D4, D5, D6, D7, D8, D9 +76 |
| 1 | WS2812B-2020 | LED_SK6812MINI_PLCC4_3.5x3.5mm_P1.75mm | D2 |
| 1 | 1uf | C1 | |
| 1 | 0.1uF | C2 | |
| 1 | 10uF | C3 | |
| 1 | 10k | R1 | |
| 2 | 5.1k | R2, R3 |
Kiboard design files
The KiCad project lives in the SomeonetookVeracles/Kiboard repository on GitHub; these links point at the commit this page was built from.
- SchematicPCB/Kiboard.kicad_sch
Kiboard: common questions
What microcontroller does the Kiboard use?
The Kiboard is built around the ESP32-S3-WROOM-2, from the ESP32 family.
How many components are on the Kiboard?
178 components, from 11 distinct parts. The full bill of materials is listed on this page.
Where can I download the Kiboard design files?
From the SomeonetookVeracles/Kiboard repository on GitHub, which has the schematic; the links under Design files point to each one.
Can I use the Kiboard design in my own project?
The repository has no license, so all rights stay with SomeonetookVeracles. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Kiboard without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k