4in quentindelatorre statusmodule
sonicavionics·4in-quentindelatorre-statusmodule·kicad/qdt_4in-challenge.kicad_pcb
About the 4in quentindelatorre statusmodule PCB
4in quentindelatorre statusmodule is an open source RP2040/RP2350 PCB design by sonicavionics, published on GitHub under the MIT license. It is a 2-layer board measuring 84.1 × 61.7 mm, with 43 components from 20 distinct parts.
Its main chip is the RP2040, from the RP2040/RP2350 family. Other key parts include the W25Q128JVP and MCP25625T-E/ML. By type, the board carries 19 capacitors, 9 resistors, 6 diodes, 4 connectors, 3 ICs and 2 crystals.

Main components on the 4in quentindelatorre statusmodule
4in quentindelatorre statusmodule bill of materials (BOM)
43 components, 20 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | RP2040 | QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U2 |
| 1 | W25Q128JVP | WSON-8-1EP_6x5mm_P1.27mm_EP3.4x4.3mm | U4 |
| 1 | MCP25625T-E/ML | QFN28_6X6MC_MCH | U9 |
| 1 | ABM8-272-T3 | ABM8-272-T3_ABR | X1 |
| 1 | ABS07-32.768KHZ-T X322516MLB4SI | OSC_X322516MLB4SI | Y1 |
| 1 | BUS_PCI_EXPRESS_X1 Bus_PCI_Express_x1 | BUS_PCIexpress_x1 | J1 |
| 1 | Conn_01x02 | JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | J2 |
| 1 | MSD-4-A | CUI_MSD-4-A | J3 |
| 1 | USB_C_RECEPTACLE_USB2.0_16P USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_Palconn_UTC16-G | J6 |
| 6 | LED | LED_0805_2012Metric | D1, D2, D3, D4, D5, D6 |
| 11 | 100n | C_0402_1005Metric | C1, C2, C3, C4, C5, C6, C7, C9 +3 |
| 1 | 1uF | C_0402_1005Metric | C8 |
| 1 | 15P 100n | C_0402_1005Metric | C10 |
| 1 | 15P 1uF | C_0402_1005Metric | C11 |
| 1 | 100n | C_0603_1608Metric | C12 |
| 2 | 15p | C_0603_1608Metric | C13, C14 |
| 2 | 22p | C_0603_1608Metric | C18, C19 |
| 2 | 27 | R_0402_1005Metric | R1, R2 |
| 1 | 1k | R_0603_1608Metric | R3 |
| 6 | 220 | R_0603_1608Metric | R5, R6, R7, R8, R9, R10 |
4in quentindelatorre statusmodule design files
The KiCad project lives in the sonicavionics/4in-quentindelatorre-statusmodule repository on GitHub; these links point at the commit this page was built from.
4in quentindelatorre statusmodule: common questions
What microcontroller does the 4in quentindelatorre statusmodule use?
The 4in quentindelatorre statusmodule is built around the RP2040, from the RP2040/RP2350 family.
How big is the 4in quentindelatorre statusmodule PCB?
The 4in quentindelatorre statusmodule measures 84.1 × 61.7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the 4in quentindelatorre statusmodule?
43 components, from 20 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the 4in quentindelatorre statusmodule design files?
From the sonicavionics/4in-quentindelatorre-statusmodule repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the 4in quentindelatorre statusmodule design in my own project?
Yes, under the terms of its MIT license, which sonicavionics chose for the repository.
Can I test firmware for the 4in quentindelatorre statusmodule without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k