7 open source boards using the MCP25625T-E/ML
Real designs built with the MCP25625T-E/ML, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
Pi super ups
mairas
65 × 56 mm86 parts2LBSD-3-Clause2RP2040/RP2350
Toolhead Board
chpaxson
75 × 75 mm146 parts4LNo license0RP2040/RP2350
4in gps
sonicavionics
84.1 × 61.7 mm84 parts4LMIT0RP2040/RP2350
4in quentindelatorre statusmodule
sonicavionics
84.1 × 61.7 mm43 parts2LMIT0RP2040/RP2350
Can magnetic angle sensor
chpaxson
35 × 35 mm49 parts2LNo license0MCP25625 Breakoutboard
align-racing-uia
20 × 38 mm3 parts2LNo license0RP2040/RP2350
Magn angle sensor v2
chpaxson
25 × 25 mm49 parts2LNo license0
How designs wire the MCP25625T-E/ML
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the MCP25625T-E/ML connects to, and the resistors, capacitors and other passives placed on it.
- The CLKOUT pin is left unconnected on 4 of 5 designs.
- The *TX0RTS pin is left unconnected on 4 of 5 designs.
- The *RX0BF pin is left unconnected on 4 of 5 designs.
- The VDD pin has a decoupling capacitor on 3 of 5 designs, most often 100 nF (then 47 pF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| *RESETpin 2 | Connected to: The microcontroller 40% · not connected 20% |
|
| VDDpin 3 | Connected to: 3.3V 60% · a signal 40% |
|
| TXCANpin 4 | Connected to: Not connected 60% · a signal 40% | — |
| RXCANpin 5 | Connected to: Not connected 60% · a signal 40% | — |
| CLKOUTpin 6 | Connected to: Not connected 80% · a signal 20% | — |
| *TX0RTSpin 7 | Connected to: Not connected 80% · a signal 20% | — |
| *TX1RTSpin 8 | Connected to: Not connected 60% · a signal 40% | — |
| *TX2RTSpin 9 | Connected to: Not connected 60% · a signal 40% | — |
| RXDpin 10 | Connected to: Not connected 60% · GND 20% · a signal 20% | — |
| VIOpin 11 | Connected to: 3.3V 60% · not connected 20% · a signal 20% |
|
| NCpin 14, 17 | Connected to: Not connected 60% · a signal 40% | — |
| TXDpin 16 | Connected to: Not connected 60% · a signal 40% | — |
| VSSpin 18 | Connected to: GND 60% · a signal 40% | — |
| VDDApin 19 | Connected to: 5V 80% · a signal 20% |
|
| OSC2pin 20 | Connected to: Signal 60% · not connected 40% |
|
| OSC1pin 21 | Connected to: Signal 80% · not connected 20% |
|
| GNDpin 22 | Connected to: GND 60% · not connected 20% · a signal 20% | — |
| *RX1BFpin 23 | Connected to: Not connected 60% · a signal 40% | — |
| *RX0BFpin 24 | Connected to: Not connected 80% · a signal 20% | — |
| EPADpin 29 | Connected to: GND 60% · not connected 40% | — |
8 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Pi super ups by mairas, MCP25625 Breakoutboard by align-racing-uia, Can magnetic angle sensor by chpaxson and 4in gps by sonicavionics.
The MCP25625T-E/ML in open source designs
The gallery holds 7 open source boards using the MCP25625T-E/ML from 5 GitHub repositories; a typical one measures about 65 × 56 mm and carries around 49 components.
71% are two-layer designs, the rest use four layers or more, and 43% carry an open source license.
The most starred is Pi super ups by mairas.
Parts used alongside the MCP25625T-E/ML
Microcontrollers on boards using the MCP25625T-E/ML
What boards using the MCP25625T-E/ML are built for
MCP25625T-E/ML: common questions
Where can I find a MCP25625T-E/ML reference design?
Each of the 7 boards on this page is a real design using the MCP25625T-E/ML. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the MCP25625T-E/ML CLKOUT pin connected?
The CLKOUT pin is left unconnected on 4 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the MCP25625T-E/ML.
How is the MCP25625T-E/ML *TX0RTS pin connected?
The *TX0RTS pin is left unconnected on 4 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the MCP25625T-E/ML.
How is the MCP25625T-E/ML *RX0BF pin connected?
The *RX0BF pin is left unconnected on 4 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the MCP25625T-E/ML.
Which microcontrollers do boards using the MCP25625T-E/ML use?
Most are built on RP2040/RP2350 (5) and AVR/Arduino (1).
How big is a typical board using the MCP25625T-E/ML?
The median is 65 × 56 mm, and 71% are two-layer designs.
What is the most popular open source board using the MCP25625T-E/ML?
By GitHub stars, Pi super ups by mairas, with 2 stars.
Can I simulate one of these boards using the MCP25625T-E/ML before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.