Garage project

SonicTS·garage-project·pcb/garage_controller_esp8266/garage_controller_esp8266.kicad_pcb

Garage project PCB layout, top view — open source ESP8266 board by SonicTS

About the Garage project PCB

Garage project is an open source ESP8266 PCB design by SonicTS, published on GitHub. It is a 2-layer board measuring 100 × 100 mm, with 39 components from 18 distinct parts.

Its main chip is the Wemos D1 mini connector, from the ESP8266 family. Other key parts include the MCP23017_SO and LTV-817. By type, the board carries 20 resistors, 7 capacitors, 4 diodes, 3 ICs, 3 transistors and 2 connectors.

It belongs with the iot & wireless designs in this gallery.

From the project

A project that contains code and bash commands for creating a mitm attack on an android app

A DIY setup that routes the HTTPS traffic of one Android app ("Blaulicht") through a self-hosted mitmproxy. When a specific flow pattern is detected, the mitmproxy addon publishes an MQTT command to a local Mosquitto broker (TLS + auth). An ESP8266 subscribed to that topic pulses a relay to open the garage.

This repo includes: Android per-app VPN client, a mitmproxy addon with MQTT publishing, ESP8266 RTOS-based firmware with MQTT over TLS, and infrastructure templates (systemd, firewall, MQTT broker hardening). Intended for experimentation and learning.

Main components on the Garage project

Wemos D1 mini connectorMCP23017_SOLTV-817

Garage project bill of materials (BOM)

39 components, 18 distinct parts.

QtyPartRefs
1
Wemos D1 mini connector
U1
1
MCP23017_SO
U2
1
LTV-817
U3
3
2N7002
Q1, Q2, Q3
1
Connections
J1
1
Conn_01x03_Socket
J2
1
LED
D1
1
1N5819
D2
2
SP0502BAJT
D3, D4
1
10uF
C1
5
100nF
C2, C4, C5, C6, C7
1
220uF
C3
3
1k
R1, R2, R3
1
0
R4
1
3k3
R5
6
10k
R6, R7, R8, R9, R10, R12
6
330R
R11, R14, R15, R17, R19, R20
3
100k
R13, R16, R18

Garage project design files

The KiCad project lives in the SonicTS/garage-project repository on GitHub; these links point at the commit this page was built from.

Garage project: common questions

What microcontroller does the Garage project use?

The Garage project is built around the Wemos D1 mini connector, from the ESP8266 family.

How big is the Garage project PCB?

The Garage project measures 100 × 100 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Garage project?

39 components, from 18 distinct parts. The full bill of materials is listed on this page.

Where can I download the Garage project design files?

From the SonicTS/garage-project repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Garage project design in my own project?

The repository has no license, so all rights stay with SonicTS. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Garage project without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP8266 firmware against it before you order a PCB.

Similar boards