Telemetry Groundstation Daughterboard
Spaceflight-Rocketry-Giessen-e-V·Telemetry·groundstation/pcb/Daughterboard/TelemetryGroundstationDB.kicad_pcb
About the Telemetry Groundstation Daughterboard PCB
Telemetry Groundstation Daughterboard is an open source PCB design by Spaceflight-Rocketry-Giessen-e-V, published on GitHub under the CERN-OHL-S-2.0 license. It is a 2-layer board measuring 40 × 70 mm, with 30 components from 15 distinct parts.
Other key parts include the RC1780HP-RC232. By type, the board carries 8 resistors, 6 test points, 5 diodes, 4 modules, 2 connectors and 2 capacitors.
It belongs with the rf & radio designs in this gallery.
From the project
Open-Source Rocket Telemetry System Based On Radiocrafts RC232 Radio Modules
- Motherboard Electronics Hardware - KiCad Design Files - PDF Schematic - Interactive Schematic / iBOM - BOM - Gerber Files - PCB 3D Model - PCB Images - Daughterboard Electronics Hardware - KiCad Design Files - PDF Schematic - Interactive Schematic / iBOM - BOM - Gerber Files - PCB 3D Model - PCB Images - Electronics Casings - Motherboard Casing - Daughterboard Casing - Firmware - 869 MHz Helical Antenna - Design Files - Design Guide - Assembly Manual - Antenna 3D Model - Antenna Images - Simulation - Simulation Guide - Serial Monitor Configuration File - Graphical User Interface
Main components on the Telemetry Groundstation Daughterboard
Telemetry Groundstation Daughterboard bill of materials (BOM)
30 components, 15 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | RC1780HP-RC232 | Radiocrafts RC1780HP-RC232 | U1 |
| 4 | M4 Mounting Hole | M4 Mounting Hole | M1, M2, M3, M4 |
| 1 | RFPC-SMA27-F | GRADCONN_RFPC-SMA27-F | J1 |
| 1 | ICD15S13E4GV00LF | AMPHENOL_ICD15S13E4GV00LF[1] | J2 |
| 6 | TestPoint | Test Point | TP1, TP2, TP3, TP4, TP5, TP6 |
| 2 | ~ | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | ZP1, ZS1 |
| 3 | green | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1, D3, D4 |
| 1 | yellow | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D2 |
| 1 | WE-TVS_SOT23-3L_824021 | SOT-23-3 | D5 |
| 1 | 1 nF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 1 | 1 uf | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2 |
| 1 | 2K7 2k7 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 2 | 560R | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R3 |
| 3 | 5K6 5k6 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4, R5, R6 |
| 2 | 560R 560 Ohm | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7, R8 |
Telemetry Groundstation Daughterboard design files
The KiCad project lives in the Spaceflight-Rocketry-Giessen-e-V/Telemetry repository on GitHub; these links point at the commit this page was built from.
Telemetry Groundstation Daughterboard: common questions
How big is the Telemetry Groundstation Daughterboard PCB?
The Telemetry Groundstation Daughterboard measures 40 × 70 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Telemetry Groundstation Daughterboard?
30 components, from 15 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Telemetry Groundstation Daughterboard design files?
From the Spaceflight-Rocketry-Giessen-e-V/Telemetry repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Telemetry Groundstation Daughterboard design in my own project?
Yes, under the terms of its CERN-OHL-S-2.0 license, which Spaceflight-Rocketry-Giessen-e-V chose for the repository.
More boards in Telemetry
Similar boards
Hat
pa3gsb
65 × 56 mm81 parts2LNo license675Radioberry juice
pa3gsb
65 × 56 mm87 parts2LNo license675Radioberry preamp
pa3gsb
65 × 56 mm137 parts2LNo license675Goodwatch20
travisgoodspeed
25.6 × 27.6 mm20 parts2LNo license568GoodPocketWatch
travisgoodspeed
75.2 × 101.2 mm56 parts2LNo license568Goodwatch31
travisgoodspeed
25.6 × 27.6 mm23 parts2LNo license568