Telemetry Groundstation Motherboard

Spaceflight-Rocketry-Giessen-e-V·Telemetry·groundstation/pcb/Motherboard/TelemetryGroundstationMB.kicad_pcb

Telemetry Groundstation Motherboard PCB layout, top view — open source board by Spaceflight-Rocketry-Giessen-e-V

About the Telemetry Groundstation Motherboard PCB

Telemetry Groundstation Motherboard is an open source PCB design by Spaceflight-Rocketry-Giessen-e-V, published on GitHub under the CERN-OHL-S-2.0 license. It is a 2-layer board measuring 133 × 79.8 mm, with 119 components from 33 distinct parts.

Other key parts include the CP2102N, AVR128DB64X-XPT and MIC29300-3.3WU. By type, the board carries 49 resistors, 24 diodes, 12 connectors, 12 capacitors, 8 switches and 5 ICs.

It belongs with the rf & radio designs in this gallery.

From the project

Open-Source Rocket Telemetry System Based On Radiocrafts RC232 Radio Modules

- Motherboard Electronics Hardware - KiCad Design Files - PDF Schematic - Interactive Schematic / iBOM - BOM - Gerber Files - PCB 3D Model - PCB Images - Daughterboard Electronics Hardware - KiCad Design Files - PDF Schematic - Interactive Schematic / iBOM - BOM - Gerber Files - PCB 3D Model - PCB Images - Electronics Casings - Motherboard Casing - Daughterboard Casing - Firmware - 869 MHz Helical Antenna - Design Files - Design Guide - Assembly Manual - Antenna 3D Model - Antenna Images - Simulation - Simulation Guide - Serial Monitor Configuration File - Graphical User Interface

Main components on the Telemetry Groundstation Motherboard

Telemetry Groundstation Motherboard bill of materials (BOM)

119 components, 33 distinct parts — part numbers from the project's BOM.

QtyPartRefs
3
CP2102N
U1, U2, U3
1
AVR128DB64X-XPT
AVR128DB64x-xPT
U5
1
MIC29300-3.3WU
MIC29300-3.3WU-TR
U6
4
M4 Mounting Hole
M1, M2, M3, M4
4
USB-C
J1, J2, J4, J12
4
ICD15S13E4GV00LF
J3, J5, J6, J7
1
LD09S33E4GV00LF
J8
1
CONN_01X04_SOCKET
Conn_01x04_Socket
J9
1
CONN_01X01
Conn_01x01
J10
1
CONN_01X01
Conn_01x01
J11
7
SW_Push
SW1, SW2, SW3, SW4, SW5, SW6, SW7
1
SW_DIP_X01
SW_DIP_x01
SW8
5
TestPoint
TP1, TP2, TP3, TP6, TP7
13
orange
D1, D2, D3, D7, D16, D27, D28, D29 +5
1
Cree RGB LED
D4
3
SP0503BAHT
D5, D8, D14
4
green
D6, D11, D12, D15
1
red
D9
1
BAT43
D10
1
WE-TVS_SOT23-3L_824021
D13
Show 13 more
QtyPartRefs
3
4.7u
C1, C3, C6
3
0.1u
C2, C4, C5
1
10u Tantal
C7
4
1u
C9, C10, C11, C12
1
100u Elko
C13
11
560R
R1, R2, R3, R4, R5, R6, R11, R12 +3
6
5K1
5k1
R7, R8, R13, R14, R22, R27
3
47K
47k
R9, R15, R24
3
22K
22k
R10, R16, R23
2
470R
R18, R19
11
560R
R20, R21, R37, R47, R48, R51, R52, R53 +3
11
5K6
5k6
R28, R29, R30, R31, R32, R33, R34, R35 +3
2
5K1
5k1
R40, R41

Telemetry Groundstation Motherboard design files

The KiCad project lives in the Spaceflight-Rocketry-Giessen-e-V/Telemetry repository on GitHub; these links point at the commit this page was built from.

Telemetry Groundstation Motherboard: common questions

How big is the Telemetry Groundstation Motherboard PCB?

The Telemetry Groundstation Motherboard measures 133 × 79.8 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Telemetry Groundstation Motherboard?

119 components, from 33 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Telemetry Groundstation Motherboard design files?

From the Spaceflight-Rocketry-Giessen-e-V/Telemetry repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Telemetry Groundstation Motherboard design in my own project?

Yes, under the terms of its CERN-OHL-S-2.0 license, which Spaceflight-Rocketry-Giessen-e-V chose for the repository.

More boards in Telemetry

Similar boards