HardLabs

RedBoard Edge

sparkfun·RedBoard_Edge·Hardware/RedBoard_Edge.kicad_pcb

RedBoard Edge PCB layout, top view — open source AVR/Arduino board by sparkfun

About the RedBoard Edge PCB

RedBoard Edge is an open source AVR/Arduino PCB design by sparkfun, published on GitHub under the MIT license. It is a 2-layer board measuring 101.6 × 38.1 mm, with 48 components from 32 distinct parts.

Its main chip is the ATMEGA328, from the AVR/Arduino family. Other key parts include the CH340GSMD, MIC5205-3.3V, Standoff_Grounding and LM1117. By type, the board carries 12 capacitors, 12 resistors, 6 ICs, 5 diodes, 3 transistors and 3 connectors.

From the project

The RedBoard Edge is a RedBoard that's been rebuilt around the idea that projects are eventually put into an enclosure to help clean up their look.

SparkFun RedBoard Edge ========================================

The RedBoard Edge is a RedBoard that's been rebuilt around the idea that projects are eventually put into an enclosure to help clean up their look.

/Hardware - Eagle design files (.brd, .sch) /Production - Production panel files.

Documentation -------------- Hookup Guide** - Basic hookup guide for the RedBoard Edge.

RedBoard Edge, from the project README
From the project README

Main components on the RedBoard Edge

CH340GSMDMIC5205-3.3VStandoff_GroundingATMEGA328LM1117

RedBoard Edge bill of materials (BOM)

48 components, 32 distinct parts.

QtyPartRefs
1
CH340GSMD
U1
1
MIC5205-3.3V
U2
2
Standoff_Grounding
U3, U5
1
ATMEGA328
U4
1
LM1117
U6
1
MOSFET-SI2309DS
Q1
2
BSS138
Q2, Q3
1
RESONATOR-16MHZ
Y1
1
CRYSTAL-12MHZ
Y2
1
USB_MICRO-B
J4
1
QWIIC_CONNECTORJS-1MM
J17
1
POWER_JACKSMD
J20
1
PPTC_HALF-AMP
F1
2
JUMPER
JP1, JP2
1
MOMENTARY-SWITCH
S1
1
SWITCH_TOGGLE
S2
1
SHOTTKY_MBRA140
D1
1
LED-YELLOW
D2
1
LED-GREEN
D3
1
LED-RED
D4
Show 12 more
QtyPartRefs
1
LED-BLUE
D5
5
0.1UF
C1, C2, C4, C8, C12
2
10UF-TANT
C3, C6
1
47UF-35V
C5
1
1.0UF
C7
2
10PF
C9, C10
1
10NF
C11
4
470OHM
R1, R2, R5, R6
2
10KOHM
R3, R4
4
4.7KOHM
R7, R8, R9, R10
1
715OHM
R14
1
240OHM
R15

RedBoard Edge design files

The KiCad project lives in the sparkfun/RedBoard_Edge repository on GitHub; these links point at the commit this page was built from.

RedBoard Edge: common questions

What microcontroller does the RedBoard Edge use?

The RedBoard Edge is built around the ATMEGA328, from the AVR/Arduino family.

How big is the RedBoard Edge PCB?

The RedBoard Edge measures 101.6 × 38.1 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the RedBoard Edge?

48 components, from 32 distinct parts. The full bill of materials is listed on this page.

Where can I download the RedBoard Edge design files?

From the sparkfun/RedBoard_Edge repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the RedBoard Edge design in my own project?

Yes, under the terms of its MIT license, which sparkfun chose for the repository.

Can I test firmware for the RedBoard Edge without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in RedBoard_Edge

Similar boards