HardLabs

13852-Redboard.Edge panel.v10

sparkfun·RedBoard_Edge·Production/13852-Redboard.Edge-panel.v10.kicad_pcb

13852-Redboard.Edge panel.v10 PCB layout, top view — open source AVR/Arduino board by sparkfun

About the 13852-Redboard.Edge panel.v10 PCB

13852-Redboard.Edge panel.v10 is an open source AVR/Arduino PCB design by sparkfun, published on GitHub under the MIT license. It is a 2-layer board measuring 101.6 × 38.1 mm, with 48 components from 32 distinct parts.

Its main chip is the ATMEGA328, from the AVR/Arduino family. Other key parts include the CH340GSMD, MIC5205-3.3V, Standoff_Grounding and LM1117. By type, the board carries 12 capacitors, 12 resistors, 6 ICs, 5 diodes, 3 transistors and 3 connectors.

From the project

The RedBoard Edge is a RedBoard that's been rebuilt around the idea that projects are eventually put into an enclosure to help clean up their look.

SparkFun RedBoard Edge ========================================

The RedBoard Edge is a RedBoard that's been rebuilt around the idea that projects are eventually put into an enclosure to help clean up their look.

/Hardware - Eagle design files (.brd, .sch) /Production - Production panel files.

Documentation -------------- Hookup Guide** - Basic hookup guide for the RedBoard Edge.

13852-Redboard.Edge panel.v10, from the project README
From the project README

Main components on the 13852-Redboard.Edge panel.v10

CH340GSMDMIC5205-3.3VStandoff_GroundingATMEGA328LM1117

13852-Redboard.Edge panel.v10 bill of materials (BOM)

48 components, 32 distinct parts.

QtyPartRefs
1
CH340GSMD
U1
1
MIC5205-3.3V
U2
2
Standoff_Grounding
U3, U5
1
ATMEGA328
U4
1
LM1117
U6
1
MOSFET-SI2309DS
Q1
2
BSS138
Q2, Q3
1
RESONATOR-16MHZ
Y1
1
CRYSTAL-12MHZ
Y2
1
USB_MICRO-B
J4
1
QWIIC_CONNECTORJS-1MM
J17
1
POWER_JACKSMD
J20
1
PPTC_HALF-AMP
F1
2
JUMPER
JP1, JP2
1
MOMENTARY-SWITCH
S1
1
SWITCH_TOGGLE
S2
1
SHOTTKY_MBRA140
D1
1
LED-YELLOW
D2
1
LED-GREEN
D3
1
LED-RED
D4
Show 12 more
QtyPartRefs
1
LED-BLUE
D5
5
0.1UF
C1, C2, C4, C8, C12
2
10UF-TANT
C3, C6
1
47UF-35V
C5
1
1.0UF
C7
2
10PF
C9, C10
1
10NF
C11
4
470OHM
R1, R2, R5, R6
2
10KOHM
R3, R4
4
4.7KOHM
R7, R8, R9, R10
1
715OHM
R14
1
240OHM
R15

13852-Redboard.Edge panel.v10 design files

The KiCad project lives in the sparkfun/RedBoard_Edge repository on GitHub; these links point at the commit this page was built from.

13852-Redboard.Edge panel.v10: common questions

What microcontroller does the 13852-Redboard.Edge panel.v10 use?

The 13852-Redboard.Edge panel.v10 is built around the ATMEGA328, from the AVR/Arduino family.

How big is the 13852-Redboard.Edge panel.v10 PCB?

The 13852-Redboard.Edge panel.v10 measures 101.6 × 38.1 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the 13852-Redboard.Edge panel.v10?

48 components, from 32 distinct parts. The full bill of materials is listed on this page.

Where can I download the 13852-Redboard.Edge panel.v10 design files?

From the sparkfun/RedBoard_Edge repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the 13852-Redboard.Edge panel.v10 design in my own project?

Yes, under the terms of its MIT license, which sparkfun chose for the repository.

Can I test firmware for the 13852-Redboard.Edge panel.v10 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in RedBoard_Edge

Similar boards