SparkFun GNSS DAN-F10N panelized
sparkfun·SparkFun_GNSS_DAN-F10N·Hardware/Production/SparkFun_GNSS_DAN-F10N_panelized.kicad_pcb
About the SparkFun GNSS DAN-F10N panelized PCB
SparkFun GNSS DAN-F10N panelized is an open source PCB design by sparkfun, published on GitHub under the MIT license. It is a 4-layer board measuring 148.8 × 177.8 mm, with 45 components from 31 distinct parts.
Other key parts include the DT1042-04SO, RT9080-3.3, CH340C and DAN-F10N. By type, the board carries 9 capacitors, 8 resistors, 7 jumpers, 6 diodes, 4 ICs and 4 connectors.
It belongs with the rf & radio and dev boards & breakouts designs in this gallery.
From the project
A USB evaluation board for the dual L1/L5 frequency DAN-F10N GNSS receiver.
SparkFun Dualband L1/L5 GNSS Breakout - DAN-F10N ========================================
SparkFun Dualband L1/L5 GNSS Breakout - DAN-F10N (GPS-28435)
The SparkFun DAN-F10N Dualband GNSS Breakout is built around the powerful u-blox F10 engine, offering simultaneous reception of L1 and L5 frequency bands. This board leverages u-blox's advanced multipath mitigation technology to isolate the strongest signals, delivering reliable, meter-level position accuracy even in dense urban canyons. To ensure signal integrity, the module incorporates a robust SAW-LNA-SAW RF front-end with an additional…

Main components on the SparkFun GNSS DAN-F10N panelized
SparkFun GNSS DAN-F10N panelized bill of materials (BOM)
45 components, 31 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | DT1042-04SO | SOT23-6 | U1 |
| 1 | RT9080-3.3 | SOT23-5 | U3 |
| 1 | CH340C | SO-16 | U4 |
| 1 | DAN-F10N | DAN-F10N | U6 |
| 1 | USB_C_Receptacle | USB-C_16 | J1 |
| 1 | Conn_01x06 | 1x06 | J2 |
| 1 | U.FL | U.FL | J4 |
| 1 | Conn_01x08 | 1x08 | J5 |
| 1 | 6.8mm_ML414H | ML414H_IV01E | BT1 |
| 1 | 6V/0.5A/1A | 0805 | F1 |
| 1 | EXT_ANT | Jumper_2_NO | JP1 |
| 5 | ~ | Jumper_2_NC_Trace | JP2, JP3, JP7, JP9, JP10 |
| 1 | Measure | Jumper_2_PTH_SMD_Combo-NC | JP11 |
| 4 | Standoff | Standoff | ST1, ST2, ST3, ST4 |
| 1 | Red | LED_0603_1608Metric_Red | D1 |
| 2 | BAT60A | SOD-323 | D2, D3 |
| 1 | PESD0402 | C_0402_1005Metric | D4 |
| 1 | PMEG4005EJ | SOD-323 | D5 |
| 1 | Green | LED_1206_Bottom_Green | D6 |
| 1 | 33nH | C_0603_1608Metric | L1 |
Show 11 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | 0.1uF | C_0603_1608Metric | C1, C10, C14, C16 |
| 1 | 47pF | C_0603_1608Metric | C2 |
| 2 | 1.0uF | C_0603_1608Metric | C7, C9 |
| 1 | 10uF | C_0603_1608Metric | C15 |
| 1 | 33pF | C_0603_1608Metric | C17 |
| 2 | 5.1k | R_0603_1608Metric | R1, R2 |
| 2 | 1k | R_0603_1608Metric | R3, R7 |
| 1 | 4.7k | R_0603_1608Metric | R4 |
| 1 | 330 | R_0603_1608Metric | R5 |
| 1 | 13.3 | R_2512_6332Metric | R6 |
| 1 | 100k | R_0603_1608Metric | R12 |
SparkFun GNSS DAN-F10N panelized design files
The KiCad project lives in the sparkfun/SparkFun_GNSS_DAN-F10N repository on GitHub; these links point at the commit this page was built from.
SparkFun GNSS DAN-F10N panelized: common questions
How big is the SparkFun GNSS DAN-F10N panelized PCB?
The SparkFun GNSS DAN-F10N panelized measures 148.8 × 177.8 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the SparkFun GNSS DAN-F10N panelized?
45 components, from 31 distinct parts. The full bill of materials is listed on this page.
Where can I download the SparkFun GNSS DAN-F10N panelized design files?
From the sparkfun/SparkFun_GNSS_DAN-F10N repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the SparkFun GNSS DAN-F10N panelized design in my own project?
Yes, under the terms of its MIT license, which sparkfun chose for the repository.
More boards in SparkFun_GNSS_DAN-F10N
Similar boards
Breakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kRj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979