7 open source boards using the DT1042-04SO
Real designs built with the DT1042-04SO, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
SparkFun Thing Plus ESP32-S3
sparkfun
22.9 × 58.4 mm60 parts4LMIT12SparkFun GNSS UM980
sparkfun
50.8 × 50.8 mm76 parts4LMIT11ESP32
PCBMERGE
theostrichjouster-star
22.9 × 58.4 mm60 parts4LMIT0SparkFun GNSS DAN-F10N
sparkfun
40.6 × 40.6 mm45 parts4LMIT0SparkFun NEO-F10N
sparkfun
50.8 × 38.1 mm56 parts2LMIT1SparkFun GNSS DAN-F10N panelized
sparkfun
148.8 × 177.8 mm45 parts4LMIT0ESP32
SparkFun Thing Plus ESP32-S3
Valar-Systems
22.9 × 58.4 mm60 parts4LCERN-OHL-S-2.0112
How designs wire the DT1042-04SO
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the DT1042-04SO connects to, and the resistors, capacitors and other passives placed on it.
- The I/O1 pin is left unconnected on 5 of 6 designs.
- The I/O2 pin is left unconnected on 5 of 6 designs.
- The VCC pin has a capacitor to GND on 3 of 6 designs, most often 4.7 µF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| I/O1pin 1 | Connected to: Not connected 83% · a signal 17% | — |
| GNDpin 2 | Connected to: GND 100% | — |
| I/O2pin 3 | Connected to: Not connected 83% · a signal 17% | — |
| VCCpin 5 | Connected to: VBUS 50% · a signal 50% |
|
2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include SparkFun Thing Plus ESP32-S3 by Valar-Systems, SparkFun Thing Plus ESP32-S3 by sparkfun, SparkFun GNSS UM980 by sparkfun and SparkFun NEO-F10N by sparkfun.
The DT1042-04SO in open source designs
The gallery holds 7 open source boards using the DT1042-04SO from 6 GitHub repositories; a typical one measures about 40.6 × 58.4 mm and carries around 60 components.
86% use four copper layers or more, and 100% carry an open source license.
The most starred is SparkFun Thing Plus ESP32-S3 by Valar-Systems.
Parts used alongside the DT1042-04SO
Microcontrollers on boards using the DT1042-04SO
What boards using the DT1042-04SO are built for
DT1042-04SO: common questions
Where can I find a DT1042-04SO reference design?
Each of the 7 boards on this page is a real design using the DT1042-04SO. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the DT1042-04SO I/O1 pin connected?
The I/O1 pin is left unconnected on 5 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the DT1042-04SO.
How is the DT1042-04SO I/O2 pin connected?
The I/O2 pin is left unconnected on 5 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the DT1042-04SO.
How is the DT1042-04SO VCC pin connected?
The VCC pin has a capacitor to GND on 3 of 6 designs, most often 4.7 µF. Counted from the KiCad layouts of 6 open source designs using the DT1042-04SO.
What parts are used alongside the DT1042-04SO?
The CH340C, RT9080-3.3, ThingPlus, AP2112K-3.3 and ESP32-S3-MINI appear in the most repositories here.
Which microcontrollers do boards using the DT1042-04SO use?
Most are built on ESP32 (3).
How big is a typical board using the DT1042-04SO?
The median is 40.6 × 58.4 mm, and 14% are two-layer designs.
What is the most popular open source board using the DT1042-04SO?
By GitHub stars, SparkFun Thing Plus ESP32-S3 by Valar-Systems, with 112 stars.
Can I simulate one of these boards using the DT1042-04SO before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.