SparkFun NEO-F10N
sparkfun·SparkFun_u-blox_NEO-F10N·Hardware/SparkFun_NEO-F10N.kicad_pcb
About the SparkFun NEO-F10N PCB
SparkFun NEO-F10N is an open source PCB design by sparkfun, published on GitHub under the MIT license. It is a 2-layer board measuring 50.8 × 38.1 mm, with 56 components from 32 distinct parts.
Other key parts include the DT1042-04SO, AP2112K-3.3, NEO-F10N and CH340C. By type, the board carries 13 resistors, 10 capacitors, 8 jumpers, 8 diodes, 5 ICs and 4 connectors.
It belongs with the rf & radio, dev boards & breakouts and usb & debug tools designs in this gallery.
From the project
Documentation and hardware files for the low cost SparkFun GNSS L1/L5 Breakout - NEO-F10N.
SparkFun GNSS L1/L5 Breakout- NEO-F10N, SMA ========================================
SparkFun GNSS L1/L5 Breakout - NEO-F10N, SMA (GPS-24114)
The SparkFun GNSS L1/L5 Breakout - NEO-F10N, SMA is a standard precision GNSS board with meter-level positional accuracy. The NEO-F10N uses the L1/L5 bands instead of the more commonly seen L1/L2 bands. Utilizing the L5 band, the NEO-F10N delivers improved performance under challenging urban environments. The L5 signals fall within the protected ARNS (aeronautical radio navigation service) frequency band, leading to less RF interference.

Main components on the SparkFun NEO-F10N
SparkFun NEO-F10N bill of materials (BOM)
56 components, 32 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | DT1042-04SO | SOT23-6 | U1 |
| 1 | AP2112K-3.3 | SOT23-5 | U2 |
| 1 | NEO-F10N | NEO-M9N_M8T_M8U_D9S_F9P_F10N | U3 |
| 1 | ~ | Ordering_Instructions | U7 |
| 1 | CH340C | SO-16 | U8 |
| 1 | BSS138 | SOT23-3 | Q1 |
| 1 | USB_C_Receptacle | USB-C_16 | J1 |
| 1 | Conn_01x09 | 1x09 | J2 |
| 1 | Conn_01x06 | 1x06 | J4 |
| 1 | Val** | SMA_Edge | J5 |
| 1 | 6.8mm_ML414H | ML414H_IV01E | BT1 |
| 6 | ~ | Jumper_2_NC_Trace | JP1, JP2, JP3, JP4, JP7, JP8 |
| 1 | Measure | Jumper_2_PTH_SMD_Combo-NC | JP5 |
| 1 | ~ | Jumper_2_NO | JP6 |
| 4 | STAND-OFF | Standoff | ST1, ST2, ST3, ST4 |
| 1 | Red | LED_0603_1608Metric_Red | D1 |
| 2 | PESD3V3L4UG | SOT-353 | D2, D3 |
| 1 | Yellow | LED_0603_1608Metric_Yellow | D4 |
| 3 | PMEG4005EJ | SOD-323 | D5, D7, D8 |
| 1 | PESD0402 | C_0402_1005Metric | D6 |
Show 12 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 33nH | C_0603_1608Metric | L1 |
| 1 | 30Ohm | C_0603_1608Metric | L2 |
| 6 | 0.1uF | C_0603_1608Metric | C1, C2, C4, C12, C13, C16 |
| 2 | 1.0uF | C_0603_1608Metric | C3, C8 |
| 2 | 47pF | C_0603_1608Metric | C6, C7 |
| 2 | 5.1k | R_0603_1608Metric | R1, R2 |
| 1 | 10 | R_0603_1608Metric | R3 |
| 1 | 4.7k | R_0603_1608Metric | R4 |
| 1 | 2.2k | R_0603_1608Metric | R5 |
| 1 | 1k | R_0603_1608Metric | R7 |
| 1 | 10k | R_0603_1608Metric | R12 |
| 6 | 33 | R_0603_1608Metric | R15, R16, R29, R30, R31, R34 |
SparkFun NEO-F10N design files
The KiCad project lives in the sparkfun/SparkFun_u-blox_NEO-F10N repository on GitHub; these links point at the commit this page was built from.
SparkFun NEO-F10N: common questions
How big is the SparkFun NEO-F10N PCB?
The SparkFun NEO-F10N measures 50.8 × 38.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the SparkFun NEO-F10N?
56 components, from 32 distinct parts. The full bill of materials is listed on this page.
Where can I download the SparkFun NEO-F10N design files?
From the sparkfun/SparkFun_u-blox_NEO-F10N repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the SparkFun NEO-F10N design in my own project?
Yes, under the terms of its MIT license, which sparkfun chose for the repository.
More boards in SparkFun_u-blox_NEO-F10N
Similar boards
Breakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kRj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979