DMX Demonstrator - Receiver (DMX-RX1)
About the DMX Demonstrator - Receiver (DMX-RX1) PCB
DMX Demonstrator - Receiver (DMX-RX1) is an open source PCB design by SparkyBobo, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 68.6 × 53.3 mm, with 19 components from 12 distinct parts.
By type, the board carries 8 diodes, 8 resistors and 3 connectors.
From the project
DMX Demonstrator
The Receiver is an Arduino Shield which accepts the 3-wire data/clock signal from the Transmitter (DMX-TX1) and decodes the data stream to control the brightness of 4 LEDs.
You can also buy the parts for the Receiver online from a Wishlist:
- Sparkfun: Common, DMX-RX1 - Adafruit: Common, DMX-RX1
The Receiver needs parts from the common parts list but there are enough parts left over to build a Transmitter (DMX-TX1), Transmitter IO (DMX-TX2), and Frame Scrambler (DMX-FS1).
DMX Demonstrator - Receiver (DMX-RX1) bill of materials (BOM)
19 components, 12 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Input | PinHeader_1x03_P2.54mm_Horizontal | J1 |
| 1 | PWM-34 | PinHeader_1x03_P2.54mm_Horizontal | J2 |
| 1 | PWM_12 | PinHeader_1x03_P2.54mm_Horizontal | J3 |
| 1 | DATA | LED_D5.0mm | D1 |
| 1 | CLOCK | LED_D5.0mm | D2 |
| 1 | DIM3 | LED_D5.0mm | D3 |
| 1 | DIM2 | LED_D5.0mm | D4 |
| 1 | DIM1 | LED_D5.0mm | D5 |
| 1 | DIM0 | LED_D5.0mm | D6 |
| 1 | ERROR | LED_D5.0mm | D7 |
| 1 | START_CODE | LED_D5.0mm | D8 |
| 8 | 330 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R3, R4, R5, R6, R7, R8 |
DMX Demonstrator - Receiver (DMX-RX1) design files
The KiCad project lives in the SparkyBobo/dmxdemonstrator repository on GitHub; these links point at the commit this page was built from.
DMX Demonstrator - Receiver (DMX-RX1): common questions
How big is the DMX Demonstrator - Receiver (DMX-RX1) PCB?
The DMX Demonstrator - Receiver (DMX-RX1) measures 68.6 × 53.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the DMX Demonstrator - Receiver (DMX-RX1)?
19 components, from 12 distinct parts. The full bill of materials is listed on this page.
Where can I download the DMX Demonstrator - Receiver (DMX-RX1) design files?
From the SparkyBobo/dmxdemonstrator repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the DMX Demonstrator - Receiver (DMX-RX1) design in my own project?
Yes, under the terms of its GPL-3.0 license, which SparkyBobo chose for the repository.
More boards in dmxdemonstrator
DMX Demonstrator - Analog IO PWM (DMX-IO4)
60 × 60 mm24 parts2LGPL-3.02
DMX Demonstrator - Constant Current Driver (DMX-DCC)
60 × 60 mm23 parts2LGPL-3.02
DMX Demonstrator - Analog IO Voltage (DMX-IO3)
60 × 60 mm21 parts2LGPL-3.02
DMX Demonstrator - Analog IO Core (DMX-IO2)
60 × 60 mm20 parts2LGPL-3.02
DMX Demonstrator - DMX-512 IO Module (DMX-IO1)
60 × 60 mm20 parts2LGPL-3.02
DMX Demonstrator - Transmitter (DMX-TX1)
68.6 × 53.3 mm17 parts2LGPL-3.02
DMX Demonstrator - Frame Scrambler (DMX-FS1)
68.6 × 53.3 mm16 parts2LGPL-3.02
DMX Demonstrator - Control-Pro Dimmer (DMX-CPDB)
100 × 90 mm16 parts2LGPL-3.02
DMX Demonstrator - Control Pro Adapter (DMX-CPAD)
68.6 × 53.3 mm12 parts2LGPL-3.02