DMX Demonstrator - Frame Scrambler (DMX-FS1)
About the DMX Demonstrator - Frame Scrambler (DMX-FS1) PCB
DMX Demonstrator - Frame Scrambler (DMX-FS1) is an open source PCB design by SparkyBobo, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 68.6 × 53.3 mm, with 16 components from 9 distinct parts.
By type, the board carries 7 resistors, 6 diodes and 3 connectors.
From the project
DMX Demonstrator
The Frame Scrambler is an Arduino Shield board designed to accept the 3-wire data/clock signal from the transmitter, decode the data stream, and re-transmit the stream to the receiver. It can impact the data bit being sent to the receiver by changing a 0 to a 1 or a 1 to a 0.
When using the scrambler, you might consider adding two more display-pros if you already plan to use a display-pro. Normally, 1 display-pro is used to display the clock and data sent between the transmitter and receiver. Since the scrambler changes the data pin so it is different between the transmitter and receiver, an…
DMX Demonstrator - Frame Scrambler (DMX-FS1) bill of materials (BOM)
16 components, 9 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Input | PinHeader_1x03_P2.54mm_Horizontal | J1 |
| 1 | Output | PinHeader_1x03_P2.54mm_Horizontal | J2 |
| 1 | Display | PinHeader_1x03_P2.54mm_Horizontal | J3 |
| 1 | DATA_OUT | LED_D5.0mm | D1 |
| 1 | CLOCK_OUT | LED_D5.0mm | D2 |
| 1 | DATA_IN | LED_D5.0mm | D3 |
| 1 | CLOCK_IN | LED_D5.0mm | D4 |
| 2 | DIM1 | LED_D5.0mm | D5, D6 |
| 7 | 330 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R3, R4, R5, R6, R7 |
DMX Demonstrator - Frame Scrambler (DMX-FS1) design files
The KiCad project lives in the SparkyBobo/dmxdemonstrator repository on GitHub; these links point at the commit this page was built from.
DMX Demonstrator - Frame Scrambler (DMX-FS1): common questions
How big is the DMX Demonstrator - Frame Scrambler (DMX-FS1) PCB?
The DMX Demonstrator - Frame Scrambler (DMX-FS1) measures 68.6 × 53.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the DMX Demonstrator - Frame Scrambler (DMX-FS1)?
16 components, from 9 distinct parts. The full bill of materials is listed on this page.
Where can I download the DMX Demonstrator - Frame Scrambler (DMX-FS1) design files?
From the SparkyBobo/dmxdemonstrator repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the DMX Demonstrator - Frame Scrambler (DMX-FS1) design in my own project?
Yes, under the terms of its GPL-3.0 license, which SparkyBobo chose for the repository.
More boards in dmxdemonstrator
DMX Demonstrator - Analog IO PWM (DMX-IO4)
60 × 60 mm24 parts2LGPL-3.02
DMX Demonstrator - Constant Current Driver (DMX-DCC)
60 × 60 mm23 parts2LGPL-3.02
DMX Demonstrator - Analog IO Voltage (DMX-IO3)
60 × 60 mm21 parts2LGPL-3.02
DMX Demonstrator - Analog IO Core (DMX-IO2)
60 × 60 mm20 parts2LGPL-3.02
DMX Demonstrator - DMX-512 IO Module (DMX-IO1)
60 × 60 mm20 parts2LGPL-3.02
DMX Demonstrator - Receiver (DMX-RX1)
68.6 × 53.3 mm19 parts2LGPL-3.02
DMX Demonstrator - Transmitter (DMX-TX1)
68.6 × 53.3 mm17 parts2LGPL-3.02
DMX Demonstrator - Control-Pro Dimmer (DMX-CPDB)
100 × 90 mm16 parts2LGPL-3.02
DMX Demonstrator - Control Pro Adapter (DMX-CPAD)
68.6 × 53.3 mm12 parts2LGPL-3.02