DMX Demonstrator - Control Pro Adapter (DMX-CPAD)

SparkyBobo·dmxdemonstrator·hardware/control-pro/transmitter-adapter/transmitter-adapter.kicad_pcb

DMX Demonstrator - Control Pro Adapter (DMX-CPAD) PCB layout, top view — open source board by SparkyBobo

About the DMX Demonstrator - Control Pro Adapter (DMX-CPAD) PCB

DMX Demonstrator - Control Pro Adapter (DMX-CPAD) is an open source PCB design by SparkyBobo, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 68.6 × 53.3 mm, with 12 components from 8 distinct parts.

Other key parts include the 74LS07. By type, the board carries 5 resistors, 3 diodes, 2 connectors, 1 IC and 1 capacitor.

From the project

DMX Demonstrator

The Control Pro is built to work with either transmitter or transmitter-retro. When used with an Arduino, an additional board, the Transmitter IO Interface (DMX-TX2), is required to connect the Control Pro to the Arduino. The transmitter software automatically detects whether DMX-TX1, the standard transmitter, or DMX-TX2, the Transmitter IO Interface, is connected.

Main components on the DMX Demonstrator - Control Pro Adapter (DMX-CPAD)

DMX Demonstrator - Control Pro Adapter (DMX-CPAD) bill of materials (BOM)

12 components, 8 distinct parts.

Qty	Part	Footprint	Refs
1	74LS07	DIP-14_W7.62mm	U1
1	Output	PinHeader_1x03_P2.54mm_Horizontal	J1
1	INPUT	IDC-Header_2x08_P2.54mm_Horizontal	J2
1	DATA	LED_D5.0mm	D1
1	CLOCK	LED_D5.0mm	D2
1	DETECTED	LED_D5.0mm	D3
1	0.1uF	C_Disc_D3.0mm_W1.6mm_P2.50mm	C1
5	330	R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal	R1, R2, R3, R4, R5

DMX Demonstrator - Control Pro Adapter (DMX-CPAD) design files

The KiCad project lives in the SparkyBobo/dmxdemonstrator repository on GitHub; these links point at the commit this page was built from.

Layouthardware/control-pro/transmitter-adapter/transmitter-adapter.kicad_pcb

DMX Demonstrator - Control Pro Adapter (DMX-CPAD): common questions

How big is the DMX Demonstrator - Control Pro Adapter (DMX-CPAD) PCB?

The DMX Demonstrator - Control Pro Adapter (DMX-CPAD) measures 68.6 × 53.3 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the DMX Demonstrator - Control Pro Adapter (DMX-CPAD)?

12 components, from 8 distinct parts. The full bill of materials is listed on this page.

Where can I download the DMX Demonstrator - Control Pro Adapter (DMX-CPAD) design files?

From the SparkyBobo/dmxdemonstrator repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the DMX Demonstrator - Control Pro Adapter (DMX-CPAD) design in my own project?

Yes, under the terms of its GPL-3.0 license, which SparkyBobo chose for the repository.

More boards in dmxdemonstrator