Haptic console wheel module perfboard
speedypleath·wheel-module-kicad·project/haptic-console-wheel-module-perfboard.kicad_pcb
About the Haptic console wheel module perfboard
Haptic console wheel module perfboard is an open source RP2040/RP2350 PCB design by speedypleath, published on GitHub. It is a 2-layer board measuring 71.1 × 71.1 mm, with 13 components from 10 distinct parts.
Its main chip is the RaspberryPi_Pico, from the RP2040/RP2350 family. By type, the board carries 6 resistors, 2 connectors, 2 diodes, 2 capacitors and 1 IC.
It belongs with the audio designs in this gallery.
From the project
PCB for wheel module
KiCad project for the electronics of the Wheel Module (M3) of Haptic Console v1.0, part of the ITPMA dissertation Tactile I/O: Exploring physicality in MIDI controllers.
The mechanical side of this module (200 mm DIN aluminium handwheel, PETG shaft, 6204-2RS bearings, GT2 1:1 belt drive) is documented in the Obsidian vault under Notes/Haptic Console - Handwheel Belt Drive Module Plan.md. This repository covers only the sensor board that reads the optical encoder and presents it to the console.

Main components on the Haptic console wheel module perfboard
Haptic console wheel module perfboard bill of materials (BOM)
13 components, 10 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | RaspberryPi_Pico | RaspberryPi_Pico_Common_THT | U1 |
| 1 | XH2.54-6P Console | JST_XH_B6B-XH-A_1x06_P2.50mm_Vertical | J1 |
| 1 | E38S6G5-600B-G24N AB | PinHeader_1x05_P2.54mm_Vertical | J2 |
| 1 | PWR Green | LED_D3.0mm | D1 |
| 1 | LNK Red | LED_D3.0mm | D2 |
| 1 | 10uF | CP_Radial_D4.0mm_P2.50mm | C1 |
| 1 | 100nF | C_Disc_D5.0mm_W2.5mm_P5.00mm | C2 |
| 2 | 4.7k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2 |
| 2 | 330R | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4, R5 |
| 2 | 1k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R7, R8 |
Haptic console wheel module perfboard design files
The KiCad project lives in the speedypleath/wheel-module-kicad repository on GitHub; these links point at the commit this page was built from.
Haptic console wheel module perfboard: common questions
What microcontroller does the Haptic console wheel module perfboard use?
The Haptic console wheel module perfboard is built around the RaspberryPi_Pico, from the RP2040/RP2350 family.
How big is the Haptic console wheel module perfboard?
The Haptic console wheel module perfboard measures 71.1 × 71.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Haptic console wheel module perfboard?
13 components, from 10 distinct parts. The full bill of materials is listed on this page.
Where can I download the Haptic console wheel module perfboard design files?
From the speedypleath/wheel-module-kicad repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Haptic console wheel module perfboard design in my own project?
The repository has no license, so all rights stay with speedypleath. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Haptic console wheel module perfboard without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
More boards in wheel-module-kicad
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k