Haptic console wheel module stripboard

speedypleath·wheel-module-kicad·project/haptic-console-wheel-module-stripboard.kicad_pcb

Haptic console wheel module stripboard layout, top view — open source RP2040/RP2350 board by speedypleath

About the Haptic console wheel module stripboard

Haptic console wheel module stripboard is an open source RP2040/RP2350 PCB design by speedypleath, published on GitHub. It is a 2-layer board measuring 104.1 × 104.1 mm, with 21 components from 16 distinct parts.

Its main chip is the RaspberryPi_Pico, from the RP2040/RP2350 family. By type, the board carries 6 resistors, 2 connectors, 2 diodes, 2 capacitors and 1 IC.

It belongs with the audio designs in this gallery.

From the project

PCB for wheel module

KiCad project for the electronics of the Wheel Module (M3) of Haptic Console v1.0, part of the ITPMA dissertation Tactile I/O: Exploring physicality in MIDI controllers.

The mechanical side of this module (200 mm DIN aluminium handwheel, PETG shaft, 6204-2RS bearings, GT2 1:1 belt drive) is documented in the Obsidian vault under Notes/Haptic Console - Handwheel Belt Drive Module Plan.md. This repository covers only the sensor board that reads the optical encoder and presents it to the console.

Haptic console wheel module stripboard, from the project README
From the project README

Main components on the Haptic console wheel module stripboard

Haptic console wheel module stripboard bill of materials (BOM)

21 components, 16 distinct parts.

QtyPartRefs
1
RaspberryPi_Pico
U1
1
XH2.54-6P Console
J1
1
E38S6G5-600B-G24N AB
J2
2
+5V
W1, W3
1
/IRQ
W2
1
+3V3
W4
1
/LNK
W5
3
GND
W6, W7, W8
1
PWR Green
D1
1
LNK Red
D2
1
10uF
C1
1
100nF
C2
1
4.7k
R1
1
4.7k
R2
2
330R
R4, R5
2
1k
R7, R8

Haptic console wheel module stripboard design files

The KiCad project lives in the speedypleath/wheel-module-kicad repository on GitHub; these links point at the commit this page was built from.

Haptic console wheel module stripboard: common questions

What microcontroller does the Haptic console wheel module stripboard use?

The Haptic console wheel module stripboard is built around the RaspberryPi_Pico, from the RP2040/RP2350 family.

How big is the Haptic console wheel module stripboard?

The Haptic console wheel module stripboard measures 104.1 × 104.1 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Haptic console wheel module stripboard?

21 components, from 16 distinct parts. The full bill of materials is listed on this page.

Where can I download the Haptic console wheel module stripboard design files?

From the speedypleath/wheel-module-kicad repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Haptic console wheel module stripboard design in my own project?

The repository has no license, so all rights stay with speedypleath. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Haptic console wheel module stripboard without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in wheel-module-kicad

Similar boards