FY6600 Power Supply
sq9nje·fy6600_power_supply
About the FY6600 Power Supply PCB
FY6600 Power Supply is an open source PCB design by sq9nje, published on GitHub. It is a 2-layer board measuring 95 × 100 mm, with 48 components from 23 distinct parts.
Other key parts include the LM7805_TO220, LM317_TO-220 and LM337_TO220. By type, the board carries 17 capacitors, 9 diodes, 7 resistors, 3 ICs, 3 connectors and 3 inductors.
It belongs with the power & battery designs in this gallery.
From the project
A replacement power supply module for FeelTech FY6600 generator
Main components on the FY6600 Power Supply
FY6600 Power Supply bill of materials (BOM)
48 components, 23 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM7805_TO220 | TO-220-3_Vertical | U1 |
| 1 | LM317_TO-220 | TO-220-3_Vertical | U2 |
| 1 | LM337_TO220 | TO-220-3_Vertical | U3 |
| 1 | Conn_01x02 | TerminalBlock_Wuerth_691311400102_P7.62mm | J1 |
| 1 | Conn_01x06 | JST_XH_B6B-XH-A_1x06_P2.50mm_Vertical | J2 |
| 1 | Conn_01x02 | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J3 |
| 1 | 200mA | Fuseholder_Cylinder-5x20mm_Stelvio-Kontek_PTF78_Horizontal_Open | F1 |
| 2 | 4.7k | Potentiometer_Piher_PT-6-V_Vertical | RV1, RV2 |
| 1 | SW_SPST | TerminalBlock_Wuerth_691311400102_P7.62mm | SW1 |
| 1 | Transformer_1P_1S | Transformer_Breve_TEZ-38x45 | T1 |
| 1 | Transformer_1P_2S | Transformer_Breve_TEZ-38x45 | T2 |
| 2 | D_Bridge_+A-A | Diode_Bridge_Round_D9.0mm | D1, D5 |
| 3 | LED_Small | D_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D2, D3, D4 |
| 4 | ER1A | D_SMA | D6, D7, D8, D9 |
| 3 | Z0805C221BPWZT | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | FB1, FB2, FB3 |
| 3 | 4700u | CP_Radial_D18.0mm_P7.50mm | C1, C5, C9 |
| 8 | 100n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C4, C6, C8, C10, C12, C16, C17 |
| 3 | 470u | CP_Radial_D10.0mm_P5.00mm | C3, C7, C11 |
| 3 | 10n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C13, C14, C15 |
| 2 | 1k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R7 |
Show 3 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 6.8k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R6 |
| 1 | 3.3k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
| 2 | 10k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4, R5 |
FY6600 Power Supply design files
The KiCad project lives in the sq9nje/fy6600_power_supply repository on GitHub; these links point at the commit this page was built from.
FY6600 Power Supply: common questions
How big is the FY6600 Power Supply PCB?
The FY6600 Power Supply measures 95 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the FY6600 Power Supply?
48 components, from 23 distinct parts. The full bill of materials is listed on this page.
Where can I download the FY6600 Power Supply design files?
From the sq9nje/fy6600_power_supply repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the FY6600 Power Supply design in my own project?
The repository has no license, so all rights stay with sq9nje. Use it as a reference, and ask the author before reusing the design.
More boards in fy6600_power_supply
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k