FY6600 Power Supply - mod
sq9nje·fy6600_power_supply
About the FY6600 Power Supply - mod PCB
FY6600 Power Supply - mod is an open source PCB design by sq9nje, published on GitHub. It is a 2-layer board measuring 95 × 120 mm, with 42 components from 22 distinct parts.
Other key parts include the LM7805_TO220, LM317_TO-220 and LM337_TO220. By type, the board carries 15 capacitors, 7 resistors, 5 diodes, 3 ICs, 3 connectors and 3 inductors.
It belongs with the power & battery designs in this gallery.
From the project
A replacement power supply module for FeelTech FY6600 generator
Main components on the FY6600 Power Supply - mod
FY6600 Power Supply - mod bill of materials (BOM)
42 components, 22 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM7805_TO220 | TO-220-3_Vertical | U1 |
| 1 | LM317_TO-220 | TO-220-3_Vertical | U2 |
| 1 | LM337_TO220 | TO-220-3_Vertical | U3 |
| 1 | Conn_01x02 | TerminalBlock_Wuerth_691311400102_P7.62mm | J1 |
| 1 | Conn_01x06 | JST_XH_B6B-XH-A_1x06_P2.50mm_Vertical | J2 |
| 1 | Conn_01x02 | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J3 |
| 1 | 200mA | Fuseholder_Cylinder-5x20mm_Stelvio-Kontek_PTF78_Horizontal_Open | F1 |
| 2 | 3.3k | Potentiometer_Piher_PT-6-V_Vertical | RV1, RV2 |
| 1 | SW_SPST | TerminalBlock_Wuerth_691311400102_P7.62mm | SW1 |
| 1 | Transformer_1P_1S | Transformer_Breve_TEZ-38x45 | T1 |
| 1 | Transformer_1P_2S | Transformer_Breve_TEZ-38x45 | T2 |
| 2 | D_Bridge_+A-A | Diode_Bridge_Round_D9.0mm | D1, D5 |
| 3 | LED_Small | D_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D2, D3, D4 |
| 3 | Z0805C221BPWZT | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | FB1, FB2, FB3 |
| 3 | 2200u | CP_Radial_D18.0mm_P7.50mm | C1, C5, C9 |
| 6 | 100n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C4, C6, C8, C10, C12 |
| 3 | 470u | CP_Radial_D10.0mm_P5.00mm | C3, C7, C11 |
| 3 | 10n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C13, C14, C15 |
| 2 | 1k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R7 |
| 2 | 8.2k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R6 |
Show 2 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 2.2k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
| 2 | 4.7k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4, R5 |
FY6600 Power Supply - mod design files
The KiCad project lives in the sq9nje/fy6600_power_supply repository on GitHub; these links point at the commit this page was built from.
FY6600 Power Supply - mod: common questions
How big is the FY6600 Power Supply - mod PCB?
The FY6600 Power Supply - mod measures 95 × 120 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the FY6600 Power Supply - mod?
42 components, from 22 distinct parts. The full bill of materials is listed on this page.
Where can I download the FY6600 Power Supply - mod design files?
From the sq9nje/fy6600_power_supply repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the FY6600 Power Supply - mod design in my own project?
The repository has no license, so all rights stay with sq9nje. Use it as a reference, and ask the author before reusing the design.
More boards in fy6600_power_supply
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k