Valentino
Sreeram-Ramesh·KiCad-Projects·Valentino/Valentino.kicad_pcb
About the Valentino PCB
Valentino is an open source AVR/Arduino PCB design by Sreeram-Ramesh, published on GitHub under the MIT license. It is a 2-layer board measuring 60.1 × 65.7 mm, with 18 components from 13 distinct parts.
Its main chip is the ATmega328-A, from the AVR/Arduino family. Other key parts include the MIC5504-3.3YM5. By type, the board carries 9 capacitors, 2 ICs, 2 resistors, 1 crystal, 1 connector and 1 switch.
It belongs with the wearables designs in this gallery.
From the project
An archive for my KiCad project folders.
An archive for all my KiCad project folders for various projects I've been working on. Find more about each of these KiCad projects on their respective repos if they exist wherein I have shared about the project itself, here's a quick overview of my KiCad designs.
Several attempts were made by me in the past to try out designing and printing PCBs for my personal high school projects. After constant yapping and getting my dad on-board for my PCB fab through JLC PCB, results were pretty bad cuz of my PCB design skills. Some pictures for context. Fast forwarding now, I understood high-school me…

Main components on the Valentino
Valentino bill of materials (BOM)
18 components, 13 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ATmega328-A | TQFP-32_7x7mm_P0.8mm | U1 |
| 1 | MIC5504-3.3YM5 | SOT-23-5 | U3 |
| 1 | 16MHz | Crystal_SMD_0603-4Pin_6.0x3.5mm | Y2 |
| 1 | Conn_01x14_Pin | PinHeader_1x14_P2.54mm_Vertical | J2 |
| 1 | SW_Push | SW_SPST_PTS810 | SW1 |
| 1 | PWR | LED_0805_2012Metric | D2 |
| 1 | 10uH | L_0805_2012Metric | L1 |
| 2 | 22pF | C_0805_2012Metric | C1, C2 |
| 1 | 10nF | C_0805_2012Metric | C3 |
| 3 | 1uF | C_0805_2012Metric | C4, C8, C9 |
| 3 | 100nF | C_0805_2012Metric | C5, C6, C7 |
| 1 | 100k | R_0805_2012Metric | R1 |
| 1 | 1k | R_0805_2012Metric | R2 |
Valentino design files
The KiCad project lives in the Sreeram-Ramesh/KiCad-Projects repository on GitHub; these links point at the commit this page was built from.
- LayoutValentino/Valentino.kicad_pcb
- SchematicValentino/Valentino.kicad_sch
Valentino: common questions
What microcontroller does the Valentino use?
The Valentino is built around the ATmega328-A, from the AVR/Arduino family.
How big is the Valentino PCB?
The Valentino measures 60.1 × 65.7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Valentino?
18 components, from 13 distinct parts. The full bill of materials is listed on this page.
Where can I download the Valentino design files?
From the Sreeram-Ramesh/KiCad-Projects repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Valentino design in my own project?
Yes, under the terms of its MIT license, which Sreeram-Ramesh chose for the repository.
Can I test firmware for the Valentino without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
More boards in KiCad-Projects
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k