PID Line Follower
Sreeram-Ramesh·KiCad-Projects·PIDFollower/PIDFollower.kicad_pcb
About the PID Line Follower PCB
PID Line Follower is an open source ESP32 PCB design by Sreeram-Ramesh, published on GitHub under the MIT license. It is a 2-layer board measuring 130 × 140 mm, with 12 components from 9 distinct parts.
Its main chip is the ESP32-DEVKIT-V1, from the ESP32 family. Other key parts include the ROB-14450 and QTR 8-RC. By type, the board carries 3 ICs, 2 modules, 2 switches, 2 LEDs, 1 battery holder and 1 resistor.
It belongs with the wearables designs in this gallery.
From the project
An archive for my KiCad project folders.
An archive for all my KiCad project folders for various projects I've been working on. Find more about each of these KiCad projects on their respective repos if they exist wherein I have shared about the project itself, here's a quick overview of my KiCad designs.
Several attempts were made by me in the past to try out designing and printing PCBs for my personal high school projects. After constant yapping and getting my dad on-board for my PCB fab through JLC PCB, results were pretty bad cuz of my PCB design skills. Some pictures for context. Fast forwarding now, I understood high-school me…

Main components on the PID Line Follower
PID Line Follower bill of materials (BOM)
12 components, 9 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ROB-14450 | MODULE_ROB-14450 | U1 |
| 1 | QTR 8-RC | PinHeader_1x11_P2.54mm_Vertical | U2 |
| 1 | ESP32-DEVKIT-V1 | MODULE_ESP32_DEVKIT_V1 | U3 |
| 2 | M | TerminalBlock_bornier-2_P5.08mm | M1, M2 |
| 1 | + | TerminalBlock_bornier-2_P5.08mm | BT1 |
| 2 | SSw | SW_Slide_1P2T_CK_OS102011MS2Q | SW1, SW2 |
| 1 | LM7805 | PinHeader_1x03_P2.54mm_Vertical | VR1 |
| 2 | BLUE | LED_D3.0mm | LED1, LED2 |
| 1 | 5k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
PID Line Follower design files
The KiCad project lives in the Sreeram-Ramesh/KiCad-Projects repository on GitHub; these links point at the commit this page was built from.
PID Line Follower: common questions
What microcontroller does the PID Line Follower use?
The PID Line Follower is built around the ESP32-DEVKIT-V1, from the ESP32 family.
How big is the PID Line Follower PCB?
The PID Line Follower measures 130 × 140 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the PID Line Follower?
12 components, from 9 distinct parts. The full bill of materials is listed on this page.
Where can I download the PID Line Follower design files?
From the Sreeram-Ramesh/KiCad-Projects repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the PID Line Follower design in my own project?
Yes, under the terms of its MIT license, which Sreeram-Ramesh chose for the repository.
Can I test firmware for the PID Line Follower without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in KiCad-Projects
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k