DevBoardX

Srhurdirsati·DevBoardX·PCB/DEVBOARD MAIN.kicad_pcb

DevBoardX PCB layout, top view — open source RP2040/RP2350 board by Srhurdirsati

About the DevBoardX PCB

DevBoardX is an open source RP2040/RP2350 PCB design by Srhurdirsati, published on GitHub. It is a 2-layer board measuring 105.3 × 128 mm, with 45 components from 5 distinct parts.

Its main chip is the RaspberryPi_Pico, from the RP2040/RP2350 family. By type, the board carries 24 switches, 20 diodes and 1 module.

It belongs with the dev boards & breakouts designs in this gallery.

From the project

3->> Fully Customizable { Modify The Code For Ur Own Functioning }

3->> Fully Customizable { Modify The Code For Ur Own Functioning }

IDK WHY EVERYTHING IS SO EXPENSIVE IN INDIA

Total Estimated Cost: $72-75 WITH SHIPPING CHARGES INCLUDED I Tried My best To Decrease The cost As Much As Possible , Would Be Much Cheaper If I Was In US

DevBoardX, from the project README
From the project README

Main components on the DevBoardX

DevBoardX bill of materials (BOM)

45 components, 5 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
RaspberryPi_Pico
A1
20
SW_PUSH_45DEG
SW_Push_45deg
SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +12
4
RotaryEncoder_Switch
SW21, SW22, SW23, SW24
19
D_Small
D1, D2, D3, D4, D5, D6, D7, D8 +11
1
1N4148
D57

DevBoardX design files

The KiCad project lives in the Srhurdirsati/DevBoardX repository on GitHub; these links point at the commit this page was built from.

DevBoardX: common questions

What microcontroller does the DevBoardX use?

The DevBoardX is built around the RaspberryPi_Pico, from the RP2040/RP2350 family.

How big is the DevBoardX PCB?

The DevBoardX measures 105.3 × 128 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the DevBoardX?

45 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the DevBoardX design files?

From the Srhurdirsati/DevBoardX repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the DevBoardX design in my own project?

The repository has no license, so all rights stay with Srhurdirsati. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the DevBoardX without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards