Sam17-bus
sssamuelll·sam17·hardware/bus-board/kicad/sam17-bus.kicad_pcb
About the Sam17-bus PCB
Sam17-bus is an open source PCB design by sssamuelll, published on GitHub under the CERN-OHL-S-2.0 license. It is a 2-layer board measuring 320 × 60 mm, with 49 components from 6 distinct parts.
By type, the board carries 13 connectors, 12 fuses, 12 diodes and 12 resistors.
It belongs with the audio designs in this gallery.
From the project
SAM17, an open-source polyphonic analog synthesizer: 16 analog channels, a 16-line FM matrix, an 8x8 patch bay through an analog crosspoint, and an STM32N657 brain running Rust. CERN-OHL-S / GPL-3.0 / CC BY-SA. Began as a 2020 engineering thesis in Venezuela.
Reparte los rieles del módulo 1 a los módulos. Sustituye al daisy-chain con cables jumper de la tesis, que era la fuente de ruido y de desafinación que la propia tesis reportó.
Se construyen dos segmentos idénticos de 320 × 60 mm. Cada uno lleva 6 slots y se alimenta con su propio par de cables desde el punto de estrella.
No es un problema de corriente, es de afinación. A 1 V/octava, 1 mV de diferencia de masa entre dos módulos son 1.2 cents de error de tono. El objetivo es ≤ 2 cents entre los cuatro módulos de la cadena de tono, y de ahí sale todo lo demás.
Sam17-bus bill of materials (BOM)
49 components, 6 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 6 | PinHeader_2x08_P2.54mm_Vertical | PinHeader_2x08_P2.54mm_Vertical | J1, J2, J3, J4, J5, J6 |
| 1 | TerminalBlock_MaiXu_MX126-5.0-04P_1x04_P5.00mm | TerminalBlock_MaiXu_MX126-5.0-04P_1x04_P5.00mm | J7 |
| 6 | Molex_KK-254_AE-6410-04A_1x04_P2.54mm_Vertical | Molex_KK-254_AE-6410-04A_1x04_P2.54mm_Vertical | P1, P2, P3, P4, P5, P6 |
| 12 | PTC_Radial_P5.08mm_Dual | PTC_Radial_P5.08mm_Dual | F1, F2, F3, F4, F5, F6, F7, F8 +4 |
| 12 | LED_D3.0mm | LED_D3.0mm | D1, D2, D3, D4, D5, D6, D7, D8 +4 |
| 12 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R3, R4, R5, R6, R7, R8 +4 |
Sam17-bus design files
The KiCad project lives in the sssamuelll/sam17 repository on GitHub; these links point at the commit this page was built from.
Sam17-bus: common questions
How big is the Sam17-bus PCB?
The Sam17-bus measures 320 × 60 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Sam17-bus?
49 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Sam17-bus design files?
From the sssamuelll/sam17 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Sam17-bus design in my own project?
Yes, under the terms of its CERN-OHL-S-2.0 license, which sssamuelll chose for the repository.
More boards in sam17
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687