BSN-C23
Stachu1·BLE_Sensor_Node·hardware/C23/BSN-C23.kicad_pcb
About the BSN-C23 PCB
BSN-C23 is an open source PCB design by Stachu1, published on GitHub. It is a 4-layer board measuring 34 × 34 mm, with 28 components from 19 distinct parts.
Other key parts include the CC2340R52E0RGER, SHTC3 and HDC2010. By type, the board carries 14 capacitors, 4 inductors, 3 ICs, 3 resistors, 1 crystal and 1 connector.
It belongs with the sensors and iot & wireless designs in this gallery.
From the project
KiCad project: BSN-C23.kicadpro`. See the root README for the board naming scheme.
KiCad project: BSN-C23.kicadpro`. See the root README for the board naming scheme.
This project started as a copy of BSN-N54-A (board outline, power, sensors, antenna and test points), with the MCU, power tree, 48 MHz crystal, RF network and SWD pins replaced for the CC2340R5. Rev A was exported and ordered as a separate design (not panelized).
Population: DNP = U2 (SHTC3), X2 (32 kHz, LFOSC is used instead), C9, C14, C15, C16, C19, C20, J1 (U.FL), L4. Everything else is fitted.
Main components on the BSN-C23
BSN-C23 bill of materials (BOM)
28 components, 19 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CC2340R52E0RGER | Texas_RGE0024B_VQFN-24-1EP_4x4mm_P0.5mm_EP2.45x2.45mm_ThermalVias | U1 |
| 1 | SHTC3 | Sensirion_DFN-4-1EP_2x2mm_P1mm_EP0.7x1.6mm | U2 |
| 1 | HDC2010 | HDC2010 | U3 |
| 1 | 48MHz | Crystal_SMD_3225-4Pin_3.2x2.5mm | X1 |
| 1 | Conn_Coaxial_Small | U.FL_Hirose_U.FL-R-SMT-1_Vertical | J1 |
| 1 | AANI-CH-0138-Q-T | AANI-CH-0138-Q-T | AE1 |
| 1 | CR2032_Holder | BatteryHolder_Renata_SMTU2032-LF_1x2032 | BT1 |
| 1 | 2.8n | L_0402_1005Metric | L1 |
| 1 | 6.7n | L_0402_1005Metric | L2 |
| 1 | 7.3n | L_0402_1005Metric | L3 |
| 1 | 10u | L_0603_1608Metric | L5 |
| 2 | 10u | C_0603_1608Metric | C1, C10 |
| 7 | 100n | C_0402_1005Metric | C2, C3, C4, C11, C12, C17, C18 |
| 1 | 100u | C_0805_2012Metric | C5 |
| 1 | 15p | C_0402_1005Metric | C6 |
| 2 | 1.5p | C_0402_1005Metric | C7, C8 |
| 1 | 1u | C_0402_1005Metric | C13 |
| 2 | 4.7k | R_0402_1005Metric | R1, R2 |
| 1 | 100k | R_0402_1005Metric | R3 |
BSN-C23 design files
The KiCad project lives in the Stachu1/BLE_Sensor_Node repository on GitHub; these links point at the commit this page was built from.
- Layouthardware/C23/BSN-C23.kicad_pcb
- Schematichardware/C23/BSN-C23.kicad_sch
BSN-C23: common questions
How big is the BSN-C23 PCB?
The BSN-C23 measures 34 × 34 mm, has 4 copper layers and is 1.6062 mm thick.
How many components are on the BSN-C23?
28 components, from 19 distinct parts. The full bill of materials is listed on this page.
Where can I download the BSN-C23 design files?
From the Stachu1/BLE_Sensor_Node repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the BSN-C23 design in my own project?
The repository has no license, so all rights stay with Stachu1. Use it as a reference, and ask the author before reusing the design.
More boards in BLE_Sensor_Node
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kSensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8kEinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kRPi RM0 WiFi/Bluetooth Module
schlae
11.1 × 14 mm76 parts6LNo license1.0k