BSN-N54

Stachu1·BLE_Sensor_Node·hardware/N54/BSN-N54.kicad_pcb

BSN-N54 PCB layout, top view — open source Nordic nRF board by Stachu1

About the BSN-N54 PCB

BSN-N54 is an open source Nordic nRF PCB design by Stachu1, published on GitHub. It is a 4-layer board measuring 34 × 34 mm, with 33 components from 24 distinct parts.

Its main chip is the nRF54L05-QFXX, from the Nordic nRF family. Other key parts include the SHTC3 and HDC2010. By type, the board carries 15 capacitors, 7 inductors, 3 ICs, 3 resistors, 2 crystals and 1 connector.

It belongs with the iot & wireless and sensors designs in this gallery.

From the project

KiCad project: BSN-N54.kicadpro`. See the root README for the board naming scheme.

KiCad project: BSN-N54.kicadpro`. See the root README for the board naming scheme.

Ordered as a separate design from BSN-C23-A (not panelized). Firmware, bring-up procedure and per-board results: firmware/N54 and firmware/N54/BRINGUP.md.

- RF: testing/RF/RFCARRIER.md. HFXO trim 11.75 pF (+127 ppm at the datasheet 7 pF). The reference PA network as laid out costs 10–11 dB. Bypassed, the PA gives 0.0 dBm at the 0 dBm setting and +7.5 dBm at +8 dBm. - Current: testing/Power/POWERMEASUREMENTS.md. Floor 4.20 µA (System OFF 2.05 µA, both about 1.4 µA above the datasheet on both boards, cause not…

Main components on the BSN-N54

nRF54L05-QFXXSHTC3HDC2010

BSN-N54 bill of materials (BOM)

33 components, 24 distinct parts.

QtyPartRefs
1
nRF54L05-QFXX
U1
1
SHTC3
U2
1
HDC2010
U3
1
32MHz
X1
1
32.768kHz
X2
1
Conn_Coaxial_Small
J1
1
AANI-CH-0138-Q-T
AE1
1
CR2032_Holder
BT1
1
100R@100MHz
FB1
1
4.7u
L1
1
2.7n
L2
2
3.5n
L3, L4
1
7.3n
L5
1
6.7n
L6
1
10u
C1
6
100n
C2, C3, C4, C5, C12, C13
2
2.2u
C6, C7
2
10n
C8, C9
1
100u
C10
1
1.5p
C14
Show 4 more
QtyPartRefs
1
2.0p
C15
1
0.3p
C16
1
1k
R1
2
4.7k
R2, R3

BSN-N54 design files

The KiCad project lives in the Stachu1/BLE_Sensor_Node repository on GitHub; these links point at the commit this page was built from.

BSN-N54: common questions

What microcontroller does the BSN-N54 use?

The BSN-N54 is built around the nRF54L05-QFXX, from the Nordic nRF family.

How big is the BSN-N54 PCB?

The BSN-N54 measures 34 × 34 mm, has 4 copper layers and is 1.6062 mm thick.

How many components are on the BSN-N54?

33 components, from 24 distinct parts. The full bill of materials is listed on this page.

Where can I download the BSN-N54 design files?

From the Stachu1/BLE_Sensor_Node repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the BSN-N54 design in my own project?

The repository has no license, so all rights stay with Stachu1. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the BSN-N54 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Nordic nRF firmware against it before you order a PCB.

More boards in BLE_Sensor_Node

Similar boards