PCBassProShop
About the PCBassProShop PCB
PCBassProShop is an open source PCB design by stanford-ssi, published on GitHub. It is a 2-layer board measuring 46.8 × 46.8 mm, with 19 components from 15 distinct parts.
Other key parts include the TPS70960DBVR. By type, the board carries 9 capacitors, 4 diodes, 4 resistors, 1 IC and 1 connector.
It belongs with the rf & radio and power & battery designs in this gallery.
From the project
Avionics for 2U Rev of Sputnik Satellite
Main components on the PCBassProShop
PCBassProShop bill of materials (BOM)
19 components, 15 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TPS70960DBVR LTC2052HGN | SSOP-16_3.9x4.9mm_P0.635mm | U1 |
| 1 | 503182-1852 505567-0631 | Molex_505567-0631 | J1 |
| 1 | 1655 SFH2430 | SFH2430 | D1 |
| 1 | CDBA240LL SFH2430 | SFH2430 | D2 |
| 1 | CMSH1-40M SFH2430 | SFH2430 | D3 |
| 1 | DFLS130L SFH2430 | SFH2430 | D4 |
| 1 | 15PF 1nF | C_0603_1608Metric | C1 |
| 1 | 15PF 0.1uF | C_0603_1608Metric | C2 |
| 3 | 0.1UF 1nF | C_0603_1608Metric | C3, C5, C7 |
| 1 | 1UF 0.1uF | C_0603_1608Metric | C4 |
| 2 | 0.1uF | C_0603_1608Metric | C6, C8 |
| 1 | 10UF 0.1uF | C_0603_1608Metric | C9 |
| 1 | 330K 3.9k | R_0603_1608Metric | R1 |
| 1 | 110K 3.9k | R_0603_1608Metric | R2 |
| 2 | 3.9k | R_0603_1608Metric | R3, R4 |
PCBassProShop design files
The KiCad project lives in the stanford-ssi/samwise-avionics repository on GitHub; these links point at the commit this page was built from.
PCBassProShop: common questions
How big is the PCBassProShop PCB?
The PCBassProShop measures 46.8 × 46.8 mm, has 2 copper layers and is 0.156 mm thick.
How many components are on the PCBassProShop?
19 components, from 15 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the PCBassProShop design files?
From the stanford-ssi/samwise-avionics repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the PCBassProShop design in my own project?
The repository has no license, so all rights stay with stanford-ssi. Use it as a reference, and ask the author before reusing the design.
More boards in samwise-avionics
RP2040/RP2350ADCS
90.2 × 95.9 mm187 parts4LNo license13
RP2040/RP2350PiCubed
90.2 × 95.9 mm176 parts4LNo license13
LT8491 - Mezzanine
37.3 × 46 mm104 parts6LNo license13
Flex Deploy Side Panels
406 × 215.5 mm104 parts4LNo license13- schematic only · 61 partsRaspberry Pi
System
61 parts2LNo license13 
RP2040/RP2350Raspberry Pi Interface Board
56 × 65 mm38 parts4LNo license13
Stationary X Panel
81.5 × 215.5 mm30 parts2LNo license13
RP2040/RP2350Z+ Panel
97 × 97 mm29 parts4LNo license13
Raspberry Pi433MHz Ground Station Board
95.5 × 56 mm14 parts4LNo license13
RP2040/RP2350Groundstation 2400 Hat
65 × 56.5 mm10 parts4LNo license13
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7k
Display Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7k
ControllerCurrentShuntAddOn
stuartpittaway
26 × 16.9 mm9 parts2LCC-BY-NC-4.01.1k
Module 16S PassiveBalanceAddOn
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k
TemperaturePCB PANEL
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k
ProgrammingAdapter
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1k