Stationary X Panel
About the Stationary X Panel PCB
Stationary X Panel is an open source PCB design by stanford-ssi, published on GitHub. It is a 2-layer board measuring 81.5 × 215.5 mm, with 30 components from 11 distinct parts.
By type, the board carries 14 diodes, 3 connectors and 1 antenna.
It belongs with the rf & radio and power & battery designs in this gallery.
From the project
Avionics for 2U Rev of Sputnik Satellite
Stationary X Panel bill of materials (BOM)
30 components, 11 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 503182-1852 205338-0006 | Molex_205338-0006 | J1 |
| 1 | CONN_ARM_JTAG_SWD_10 205338-0006 | Molex_205338-0006 | J2 |
| 1 | 35362-0850 205338-0005 | Molex_205338-0005 | J3 |
| 1 | AP.25M | AP.25M | AE1 |
| 12 | SM101K07TF | SM101K07TF | SC1, SC2, SC3, SC4, SC5, SC6, SC7, SC8 +4 |
| 1 | 1655 CDBA240LL-HF | DO-214AC | D1 |
| 1 | CDBA240LL CDBA240LL-HF | DO-214AC | D2 |
| 3 | CMSH1-40M CDBA240LL-HF | DO-214AC | D3, D7, D8 |
| 1 | DFLS130L CDBA240LL-HF | DO-214AC | D4 |
| 7 | CDBA240LL-HF | DO-214AC | D5, D9, D10, D11, D12, D13, D14 |
| 1 | 1N4151W-E3-08 CDBA240LL-HF | DO-214AC | D6 |
Stationary X Panel design files
The KiCad project lives in the stanford-ssi/samwise-avionics repository on GitHub; these links point at the commit this page was built from.
Stationary X Panel: common questions
How big is the Stationary X Panel PCB?
The Stationary X Panel measures 81.5 × 215.5 mm, has 2 copper layers and is 0.8 mm thick.
How many components are on the Stationary X Panel?
30 components, from 11 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Stationary X Panel design files?
From the stanford-ssi/samwise-avionics repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Stationary X Panel design in my own project?
The repository has no license, so all rights stay with stanford-ssi. Use it as a reference, and ask the author before reusing the design.
More boards in samwise-avionics
RP2040/RP2350ADCS
90.2 × 95.9 mm187 parts4LNo license13
RP2040/RP2350PiCubed
90.2 × 95.9 mm176 parts4LNo license13
LT8491 - Mezzanine
37.3 × 46 mm104 parts6LNo license13
Flex Deploy Side Panels
406 × 215.5 mm104 parts4LNo license13- schematic only · 61 partsRaspberry Pi
System
61 parts2LNo license13 
RP2040/RP2350Raspberry Pi Interface Board
56 × 65 mm38 parts4LNo license13
RP2040/RP2350Z+ Panel
97 × 97 mm29 parts4LNo license13
PCBassProShop
46.8 × 46.8 mm19 parts2LNo license13
Raspberry Pi433MHz Ground Station Board
95.5 × 56 mm14 parts4LNo license13
RP2040/RP2350Groundstation 2400 Hat
65 × 56.5 mm10 parts4LNo license13
Similar boards
Display Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7k
ControllerCurrentShuntAddOn
stuartpittaway
26 × 16.9 mm9 parts2LCC-BY-NC-4.01.1k
TemperaturePCB PANEL
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k
Module 16S PassiveBalanceAddOn
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k
ProgrammingAdapter
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1k
Cube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1k