Battery Board
stanford-ssi·sapling-avionics·BatteryBoard/batteryboard-v01c/batteryboard.kicad_pcb
About the Battery Board
Battery Board is an open source PCB design by stanford-ssi, published on GitHub. It is a 2-layer board measuring 95.9 × 90.2 mm, with 23 components from 11 distinct parts.
Other key parts include the R5460N233AF. By type, the board carries 9 connectors, 4 capacitors, 4 resistors, 2 transistors, 2 test points and 1 IC.
It belongs with the power & battery and science & space designs in this gallery.
From the project
2S3P Li-ion battery pack for CubeSat designs. - Fits 18650 cells (like the LG INR18650-MJ1) - Meets maximum capacity requirements of common CubeSat integrators - Uses components with radiation testing heritage - R5460x2xx for protection against - over-charge - over-discharge - sh
2S3P Li-ion battery pack for CubeSat designs. - Fits 18650 cells (like the LG INR18650-MJ1) - Meets maximum capacity requirements of common CubeSat integrators - Uses components with radiation testing heritage - R5460x2xx for protection against - over-charge - over-discharge - short-circuit - excess discharge-current - excess charge-current
Tested against the following flight requirement documents: (the cells you use play a big role here) - TBA

Main components on the Battery Board
Battery Board bill of materials (BOM)
23 components, 11 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | R5460N233AF | SOT95P280X130-6N | U1 |
| 2 | IRF7458 | SOIC-8_3.9x4.9mm_P1.27mm | Q1, Q2 |
| 6 | KEYSTONE-1042 | Keystone_1042 | J1, J2, J3, J4, J5, J6 |
| 1 | 5023520400 | duraclik_4pos | J7 |
| 2 | Screw_Terminal_01x02 | pheonix_2pos_screwterminal | J8, J12 |
| 1 | Thermistor | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | TH1 |
| 2 | TestPoint | TestPoint_Loop_D1.80mm_Drill1.0mm_Beaded | TP1, TP2 |
| 4 | 0.1uF | C_0603_1608Metric | C1, C2, C3, C4 |
| 2 | 330 | R_0603_1608Metric | R1, R2 |
| 1 | 0.01 | R_2512_6332Metric | R3 |
| 1 | 1K | R_0603_1608Metric | R4 |
Battery Board design files
The KiCad project lives in the stanford-ssi/sapling-avionics repository on GitHub; these links point at the commit this page was built from.
Battery Board: common questions
How big is the Battery Board?
The Battery Board measures 95.9 × 90.2 mm, has 2 copper layers and is 1.5748 mm thick.
How many components are on the Battery Board?
23 components, from 11 distinct parts. The full bill of materials is listed on this page.
Where can I download the Battery Board design files?
From the stanford-ssi/sapling-avionics repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Battery Board design in my own project?
The repository has no license, so all rights stay with stanford-ssi. Use it as a reference, and ask the author before reusing the design.
More boards in sapling-avionics
Microchip SAM
Mainboard
stanford-ssi
90.2 × 95.9 mm248 parts2LNo license0Solar panel side-Z-minus
stanford-ssi
97 × 97.4 mm19 parts2LNo license0Solar panel side-Z-plus
stanford-ssi
97 × 97.4 mm17 parts2LNo license0Solar panel side-X-minus
stanford-ssi
82 × 99 mm16 parts2LNo license0Solar panel side-Y-minus
stanford-ssi
82 × 99 mm16 parts2LNo license0Solar panel side-X-plus
stanford-ssi
82 × 99 mm16 parts2LNo license0Solar panel side-Y-plus
stanford-ssi
82 × 99 mm16 parts2LNo license0
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1k