Middle
StanZalewski·Autonomous-remote-monitoring-system-based-on-the-LoRaWAN-protocol·DataGathering_PCB_Design/middle_PCB.kicad_pcb
About the Middle PCB
Middle is an open source STM32 PCB design by StanZalewski, published on GitHub. It is a 2-layer board measuring 87.9 × 37.5 mm, with 25 components from 15 distinct parts.
Its main chip is the STM32G030, from the STM32 family. Other key parts include the SHT45-AD1F-R2, VEML7700-TT, BMP390L, MIC5205-3.3YM5 and SP3485EN. By type, the board carries 8 connectors, 8 capacitors, 6 ICs and 3 resistors.
It belongs with the power & battery, iot & wireless and rf & radio designs in this gallery.
From the project
Solar-powered LoRaWAN weather station — 3 custom PCBs, bare-metal STM32, 4.3 km verified link
Solar-powered agricultural weather station built from scratch: three custom PCBs, three MCUs, Modbus RTU over RS-485 between boards, LoRaWAN uplink to a private ChirpStack network server. Verified 4.3 km link in suburban terrain.
Bachelor's thesis project, Poznan University of Technology, 2026.
A field station measures temperature, humidity, pressure and ambient light, runs entirely off a 30 W solar panel with a 3S LiFePO4 pack, and reports over LoRaWAN to a self-hosted network server. No GSM, no mains power, no cloud dependency.

Main components on the Middle
Middle bill of materials (BOM)
25 components, 15 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SHT45-AD1F-R2 | Sensirion_DFN-4_1.5x1.5mm_P0.8mm_SHT4x_NoCentralPad | U1 |
| 1 | VEML7700-TT | XDCR_VEML7700-TT | U2 |
| 1 | ~ | STM32G030 | U3 |
| 1 | BMP390L | XDCR_BMP390L | U4 |
| 1 | MIC5205-3.3YM5 | SOT-23-5 | U5 |
| 1 | SP3485EN | SOIC-8_3.9x4.9mm_P1.27mm | U6 |
| 2 | RS485 BUS | SPTAF 1_2-3,5-IL | J1, J7 |
| 4 | Conn_01x03_Pin | SPTAF 1 3-3,5-IL | J2, J3, J4, J5 |
| 2 | Input power | SPTAF 1_2-3,5-IL | J6, J8 |
| 5 | 0u1 | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C15, C16, C18, C19 |
| 1 | 0n47 | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2 |
| 1 | 2u2 | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C3 |
| 1 | 10u | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C17 |
| 2 | 4k7 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2 |
| 1 | 10R | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R23 |
Middle design files
The KiCad project lives in the StanZalewski/Autonomous-remote-monitoring-system-based-on-the-LoRaWAN-protocol repository on GitHub; these links point at the commit this page was built from.
Middle: common questions
What microcontroller does the Middle use?
The Middle is built around the STM32G030, from the STM32 family.
How big is the Middle PCB?
The Middle measures 87.9 × 37.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Middle?
25 components, from 15 distinct parts. The full bill of materials is listed on this page.
Where can I download the Middle design files?
From the StanZalewski/Autonomous-remote-monitoring-system-based-on-the-LoRaWAN-protocol repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Middle design in my own project?
The repository has no license, so all rights stay with StanZalewski. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Middle without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in Autonomous-remote-monitoring-system-based-on-the-LoRaWAN-protocol
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k