Top
StanZalewski·Autonomous-remote-monitoring-system-based-on-the-LoRaWAN-protocol·Transmiting_Module_PCB_Design/top_PCB.kicad_pcb
About the Top PCB
Top is an open source PCB design by StanZalewski, published on GitHub. It is a 4-layer board measuring 100 × 66.2 mm, with 57 components from 35 distinct parts.
Other key parts include the LC76GABMD, TLV75533PDBV, FT234XD-R, SP3485EN and RAK3172. By type, the board carries 24 capacitors, 13 resistors, 6 ICs, 4 connectors, 4 diodes and 2 transistors.
It belongs with the power & battery, iot & wireless and rf & radio designs in this gallery.
From the project
Solar-powered LoRaWAN weather station — 3 custom PCBs, bare-metal STM32, 4.3 km verified link
Solar-powered agricultural weather station built from scratch: three custom PCBs, three MCUs, Modbus RTU over RS-485 between boards, LoRaWAN uplink to a private ChirpStack network server. Verified 4.3 km link in suburban terrain.
Bachelor's thesis project, Poznan University of Technology, 2026.
A field station measures temperature, humidity, pressure and ambient light, runs entirely off a 30 W solar panel with a 3S LiFePO4 pack, and reports over LoRaWAN to a self-hosted network server. No GSM, no mains power, no cloud dependency.

Main components on the Top
Top bill of materials (BOM)
57 components, 35 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LC76GABMD | LC76GABMD | U2 |
| 1 | TLV75533PDBV | SOT-23-5 | U3 |
| 1 | FT234XD-R | SON45P300X300X80-13N | U4 |
| 1 | SP3485EN | SOIC-8_3.9x4.9mm_P1.27mm | U5 |
| 1 | RAK3172 | RAK3172 | U6 |
| 1 | ~ | SO8N | U7 |
| 1 | FDN335N | SOT-23-FDN335N | Q1 |
| 1 | DMP3068L | SOT-23 | Q3 |
| 1 | UART | JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J1 |
| 1 | Conn_01x02_Socket | SPTAF 1_2-3,5-IL | J2 |
| 1 | 2171790001 | MOLEX_2171790001 | J3 |
| 1 | Input power | SPTAF 1_2-3,5-IL | J4 |
| 1 | Antenna_Shield | SMA_Molex_73251-1153_EdgeMount_Horizontal | AE1 |
| 1 | YPGS001AA | XDCR_YPGS001AA | E1 |
| 1 | B39162B8813P810 | Filter_1109-5_1.1x0.9mm | FL1 |
| 1 | SML-D12L8WT86 | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1 |
| 2 | D_TVS | Nexperia_DSN0603-2_0.6x0.3mm_P0.4mm | D2, D3 |
| 1 | PESD5V0X1UALD | D_SOD-882D | D4 |
| 1 | MI0805K601R-10 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | FB1 |
| 11 | 0u1 | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C4, C5, C7, C8, C11, C14, C17 +3 |
Show 15 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 47p | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2, C3 |
| 2 | 10u | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C6, C13 |
| 2 | 33p | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C9, C18 |
| 1 | 4u7 | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C12 |
| 4 | C | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C15, C19, C20, C22 |
| 1 | 4u7 | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C16 |
| 1 | 10n | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C25 |
| 2 | 27 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2 |
| 2 | 5k1 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R9 |
| 2 | 220 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6, R11 |
| 1 | 120 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R7 |
| 2 | 0 | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R8, R15 |
| 2 | 2k2 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R10, R12 |
| 1 | 68 | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R13 |
| 1 | 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R14 |
Top design files
The KiCad project lives in the StanZalewski/Autonomous-remote-monitoring-system-based-on-the-LoRaWAN-protocol repository on GitHub; these links point at the commit this page was built from.
Top: common questions
How big is the Top PCB?
The Top measures 100 × 66.2 mm, has 4 copper layers and is 1.6062 mm thick.
How many components are on the Top?
57 components, from 35 distinct parts. The full bill of materials is listed on this page.
Where can I download the Top design files?
From the StanZalewski/Autonomous-remote-monitoring-system-based-on-the-LoRaWAN-protocol repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Top design in my own project?
The repository has no license, so all rights stay with StanZalewski. Use it as a reference, and ask the author before reusing the design.
More boards in Autonomous-remote-monitoring-system-based-on-the-LoRaWAN-protocol
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1k