Attenuverter
stash-s·synth-modules·attenuverter/attenuverter.kicad_pcb
About the Attenuverter PCB
Attenuverter is an open source PCB design by stash-s, published on GitHub under the CC0-1.0 license. It is a 2-layer board measuring 29 × 110 mm, with 59 components from 12 distinct parts.
Other key parts include the TL072. By type, the board carries 34 resistors, 13 capacitors, 7 connectors and 5 ICs.
It belongs with the audio designs in this gallery.
From the project
Analog Synth Modules schematics shamelessly copied from Internets.
Main components on the Attenuverter
Attenuverter bill of materials (BOM)
59 components, 12 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 5 | TL072 | SOT-23-8 | U1, U2, U3, U4, U5 |
| 6 | AudioJack_Switch | Jack_3.5mm_Switch | J1, J2, J3, J4, J10, J11 |
| 1 | Conn_02x05_Odd_Even | IDC-Header_2x05_P2.54mm_Vertical | J9 |
| 3 | 30pF | C_0402_1005Metric | C1, C6, C9 |
| 10 | 100n | C_0402_1005Metric | C2, C3, C4, C5, C7, C8, C10, C11 +2 |
| 8 | 100K | Potentiometer_Alpha_RD901F-40-00D_Single_Vertical | R1, R7, R11, R12, R14, R15, R25, R27 |
| 6 | 27K | R_0402_1005Metric | R2, R3, R16, R17, R28, R29 |
| 6 | 10K | R_0402_1005Metric | R4, R5, R18, R19, R30, R31 |
| 3 | 1K | R_0402_1005Metric | R6, R24, R36 |
| 3 | 10K | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R8, R20, R32 |
| 6 | 4.7K | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R9, R10, R22, R23, R34, R35 |
| 2 | 100K | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R13, R21 |
Attenuverter design files
The KiCad project lives in the stash-s/synth-modules repository on GitHub; these links point at the commit this page was built from.
Attenuverter: common questions
How big is the Attenuverter PCB?
The Attenuverter measures 29 × 110 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Attenuverter?
59 components, from 12 distinct parts. The full bill of materials is listed on this page.
Where can I download the Attenuverter design files?
From the stash-s/synth-modules repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Attenuverter design in my own project?
Yes, under the terms of its CC0-1.0 license, which stash-s chose for the repository.
More boards in synth-modules
Exp vintage vca
stash-s
30 × 110 mm73 parts2LCC0-1.00Linear vintage vca
stash-s
30 × 110 mm61 parts2LCC0-1.00Linear vintage vca panel
stash-s
30 × 128.5 mm61 parts2LCC0-1.00Board b
stash-s
30 × 110 mm56 parts2LCC0-1.00Buffered multiple
stash-s
19 × 100 mm46 parts2LCC0-1.00Exp converter
stash-s
24.2 × 110 mm32 parts2LCC0-1.00Board jacks
stash-s
29 × 110 mm26 parts2LCC0-1.00Board circuit
stash-s
29 × 110 mm24 parts2LCC0-1.00Board a
stash-s
30 × 110 mm17 parts2LCC0-1.00Power rail
stash-s
100 × 50 mm14 parts2LCC0-1.00Board front
stash-s
30 × 128.5 mm3 parts2LCC0-1.00
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687