MotorControl
steewbsd·gilgamesh·hw/MotorControl/MotorControl.kicad_pcb
About the MotorControl PCB
MotorControl is an open source STM32 PCB design by steewbsd, published on GitHub. It is a 4-layer board measuring 101 × 48 mm, with 159 components from 39 distinct parts.
Its main chip is the STM32L431CCTx, from the STM32 family. Other key parts include the STGAP2SCM, AMC1200BDWV, SN65HVD230, TPS54202DDC and SN74LVC1G125DBV. By type, the board carries 59 capacitors, 43 resistors, 17 diodes, 16 ICs, 7 test points and 6 transistors.
Main components on the MotorControl
MotorControl bill of materials (BOM)
159 components, 39 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 6 | STGAP2SCM | SOIC-8_3.9x4.9mm_P1.27mm | U1, U2, U3, U7, U8, U9 |
| 4 | AMC1200BDWV | SOIC-8_7.5x5.85mm_P1.27mm | U4, U10, U13, U16 |
| 1 | SN65HVD230 | SOIC-8_3.9x4.9mm_P1.27mm | U5 |
| 2 | TPS54202DDC | SOT-23-6_Handsoldering | U6, U12 |
| 1 | STM32L431CCTx | LQFP-48_7x7mm_P0.5mm | U11 |
| 2 | SN74LVC1G125DBV | SOT-23-5_HandSoldering | U14, U15 |
| 6 | IRF540N | TO-220-3_Horizontal_TabDown | Q1, Q2, Q3, Q4, Q5, Q6 |
| 1 | Crystal_GND24 | Crystal_SMD_3225-4Pin_3.2x2.5mm_HandSoldering | Y1 |
| 1 | 1733583 | TerminalBlock_Phoenix_MKDS-1,5-3-5.08_1x03_P5.08mm_Horizontal | J1 |
| 1 | B4B-EH-A(LF)(SN) | JST_EH_B4B-EH-A_1x04_P2.50mm_Vertical | J2 |
| 1 | B6B-EH-A(LF)(SN) | JST_EH_B6B-EH-A_1x06_P2.50mm_Vertical | J3 |
| 1 | 430450412 | Molex_Micro-Fit_3.0_43045-0412_2x02_P3.00mm_Vertical | J4 |
| 1 | BSMD1206C-2200T | Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolder | F1 |
| 1 | BNX025 | Filter_Murata_BNX025 | FL1 |
| 1 | HoLLR2512-3W-15mR-1% | R_2512_6332Metric_Pad1.40x3.35mm_HandSolder | Rshunt1 |
| 1 | BTSA-N-P-1 | SW_PUSH_6mm_H8mm | SW1 |
| 7 | TestPoint_Flag | TestPoint_Plated_Hole_D2.0mm | TP1, TP2, TP3, TP4, TP5, TP6, TP7 |
| 6 | 1N4148WS | D_SOD-323_HandSoldering | D1, D6, D7, D10, D16, D17 |
| 4 | KT-0603W | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D2, D3, D4, D5 |
| 6 | MBR20100DT | TO-252-2 | D8, D9, D12, D13, D14, D15 |
Show 19 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PESD15VL1BA | D_SOD-323_HandSoldering | D11 |
| 2 | KOHER_MDA7030 15uH | L_KOHERelec_MDA7030 | L1, L2 |
| 32 | 0.1 µF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C4, C5, C6, C7, C10, C11, C14 +24 |
| 4 | 330 pF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C15, C33, C58 |
| 13 | 1 µF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C8, C18, C25, C26, C27, C34, C47 +5 |
| 3 | 10 µF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C9, C12, C39 |
| 4 | 22 µF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C13, C17, C21, C43 |
| 2 | 10 pF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C24, C28 |
| 1 | 10 nF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C45 |
| 20 | 12 ohm | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R3, R4, R6, R18, R19, R21 +12 |
| 3 | 470 kohm | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5, R23, R29 |
| 3 | 10 kohm | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R7, R24, R28 |
| 4 | 100 Ohm | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R8, R10, R13, R15 |
| 6 | 0 ohm | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R9, R14, R20, R26, R27, R37 |
| 3 | 4.7 kohm | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R11, R12, R16 |
| 1 | 200 kohm | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R17 |
| 1 | 22 kohm | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R35 |
| 1 | 100 kohm | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R36 |
| 1 | 27 kohm | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R43 |
MotorControl design files
The KiCad project lives in the steewbsd/gilgamesh repository on GitHub; these links point at the commit this page was built from.
MotorControl: common questions
What microcontroller does the MotorControl use?
The MotorControl is built around the STM32L431CCTx, from the STM32 family.
How big is the MotorControl PCB?
The MotorControl measures 101 × 48 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the MotorControl?
159 components, from 39 distinct parts. The full bill of materials is listed on this page.
Where can I download the MotorControl design files?
From the steewbsd/gilgamesh repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the MotorControl design in my own project?
The repository has no license, so all rights stay with steewbsd. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the MotorControl without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in gilgamesh
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k