52 open source boards using the TPS54202DDC
Real designs built with the TPS54202DDC, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
TheTick
jkramarz
33 × 22.5 mm33 parts2LGPL-3.0183RP2040/RP2350
DP aux emulator
JX5S
47 × 30 mm82 parts6LMIT48RP2040/RP2350
RD56
lhm0
120 × 118.5 mm263 parts4LCC-BY-NC-4.025NXP
TeensyRPR
RobustRobby
48 × 59.5 mm58 parts2LGPL-3.017STM32
STM32MP1 TestBoard RevB
cracked-machine
73.7 × 80 mm109 partsMIT9RP2040/RP2350
REG1-IpController2040
OpenKNX
83.2 × 15.7 mm86 parts4LCC-BY-NC-4.09STM32
Cobalt f405
msaribekyan
38.5 × 38.5 mm68 parts2LGPL-3.06Nordic nRF
Revolutetestboard
tongtongwang86
54 × 85.7 mm254 parts4LCC-BY-NC-4.05ESP32
Open Shot Clock Display
DLaxV-Community-Projects-Hub
100 × 75 mm196 parts2LCERN-OHL-P-2.05ESP32
SensactHs
klaus-liebler
100 × 86.5 mm317 parts2LApache-2.04STM32
Line-Follower-Robot v2
minhle4397
78 × 60 mm42 parts2LNo license3STM32
MainBoard
hughe349
120 × 135 mm139 parts4LGPL-3.02ESP32
Aqm envcity hw
MateusMaruzka
100 × 100 mm132 parts2LNo license2ESP32
BECom
rjsc
63.6 × 86 mm235 parts4LGPL-3.01Ecu dev board
D3stan
99.9 × 99.9 mm190 parts4LNo license1STM32
FLIGHT-CONTROLLER-PUSHPAK--2026
iamneerajverma001
40 × 40 mm74 parts4LMIT1STM32
Foc
katherinesiyuchen-sys
77.9 × 34.2 mm73 parts2LMIT1ESP32
Klondike-Connect-4---2026
williamlin108
50 × 60 mm68 parts4LNo license1STM32
OM-GOD
Sojoooo
403.7 × 202.9 mm475 parts4LNo license0STM32
MotorControl
steewbsd
101 × 48 mm159 parts4LNo license0ESP32
Telem3
5aji
124 × 80 mm151 parts4LNo license0Nordic nRF
VehiCell
ephrenm
55 × 85 mm100 parts4LNo license0Transmisor FDEM de señales sinusoidales
guillediaaazz
83.8 × 100 mm71 parts2LNo license0STM32
Sarwan1494.github.io
Sarwan1494
42 × 42 mm67 parts4LNo license0AVR/Arduino
Notemplate
au-ts
27.6 × 13.8 mm64 parts2LNo license0STM32
Falcon-F4-Flight controller
AT882
39.5 × 40 mm63 parts4LNo license0IOTTeach
SonDinh23
55.3 × 60.4 mm60 parts2LGPL-3.00ESP32
Io can
nealpalmer
39 × 29 mm47 parts2LNo license0ESP32
Cheap wled controller
davidpoza
48 × 48 mm47 parts2LNo license0ESP32
Cheap wled controller
makespacemadrid
48 × 48 mm47 parts2LNo license0PCB IMD-AMS LATCH
EVR-Tuiasi
62 × 58.6 mm47 parts2LNo license03V3 2A buck TPS54202
SteynGuelen
6.4 × 11.7 mm11 parts4LNo license0RD56c PS V1
lhm0
120 × 120 mm31 parts2LCC-BY-NC-4.025REG1-App-Eth
OpenKNX
83 × 32.8 mm58 parts2LCC-BY-NC-4.09ESP32
SensactHsIO5
klaus-liebler
90 × 67.5 mm213 parts2LApache-2.04SignleCellBoard
hughe349
95.3 × 105.4 mm37 parts2LGPL-3.02
How designs wire the TPS54202DDC
Read from the KiCad layouts of 37 open source designs, one per repository: what each pin of the TPS54202DDC connects to, and the resistors, capacitors and other passives placed on it.
- The SW pin has a series capacitor on 35 of 37 designs, most often 100 nF (then 1 µF).
- The BOOT pin has a series capacitor on 35 of 37 designs, most often 100 nF (then 1 µF).
- The SW pin has a inductor on 33 of 37 designs, most often 15 µH (then 4.7 µH).
- The FB pin has a resistor to GND on 32 of 37 designs, most often 13.3 kΩ (then 22 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1 | Connected to: GND 95% | — |
| SWpin 2 | Connected to: Signal 95% |
|
| VINpin 3 | Connected to: 12V 57% · a signal 43% |
|
| FBpin 4 | Connected to: Signal 97% |
|
| BOOTpin 6 | Connected to: Signal 97% |
|
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include TheTick by jkramarz, DP aux emulator by JX5S, Sek Coil sphere by lhm0 and RD56 by lhm0.
The TPS54202DDC in open source designs
The gallery holds 52 open source boards using the TPS54202DDC from 37 GitHub repositories; a typical one measures about 83.1 × 63.2 mm and carries around 78 components.
59% are two-layer designs, the rest use four layers or more, and 40% carry an open source license.
The most starred is TheTick by jkramarz.
Parts used alongside the TPS54202DDC
Microcontrollers on boards using the TPS54202DDC
What boards using the TPS54202DDC are built for
TPS54202DDC: common questions
Where can I find a TPS54202DDC reference design?
Each of the 52 boards on this page is a real design using the TPS54202DDC. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the TPS54202DDC SW pin connected?
The SW pin has a series capacitor on 35 of 37 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 37 open source designs using the TPS54202DDC.
How is the TPS54202DDC BOOT pin connected?
The BOOT pin has a series capacitor on 35 of 37 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 37 open source designs using the TPS54202DDC.
What resistor goes on the TPS54202DDC FB pin?
The FB pin has a resistor to GND on 32 of 37 designs, most often 13.3 kΩ (then 22 kΩ). Counted from the KiCad layouts of 37 open source designs using the TPS54202DDC.
What parts are used alongside the TPS54202DDC?
The USBLC6-2SC6, AMS1117-3.3, W25Q128JVS, AP2112K-3.3 and ESP32-S3-WROOM-1 appear in the most repositories here.
Which microcontrollers do boards using the TPS54202DDC use?
Most are built on ESP32 (20), STM32 (12), RP2040/RP2350 (4) and Nordic nRF (2).
How big is a typical board using the TPS54202DDC?
The median is 83.1 × 63.2 mm, and 59% are two-layer designs.
What is the most popular open source board using the TPS54202DDC?
By GitHub stars, TheTick by jkramarz, with 183 stars.
Can I simulate one of these boards using the TPS54202DDC before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.