RemoteController
steewbsd·gilgamesh·hw/RemoteController/RemoteController.kicad_pcb
About the RemoteController PCB
RemoteController is an open source Nordic nRF PCB design by steewbsd, published on GitHub. It is a 4-layer board measuring 100 × 75 mm, with 132 components from 58 distinct parts.
Its main chip is the NRF52810-QFAA-T, from the Nordic nRF family. Other key parts include the XA17-G4K, SPF5043Z, MICRF220AYQS-TR, H3-TCD-12-222X+ and AD8314ARMZ-REEL. By type, the board carries 53 capacitors, 36 resistors, 16 ICs, 8 inductors, 6 connectors and 5 switches.
Main components on the RemoteController
RemoteController bill of materials (BOM)
132 components, 58 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XA17-G4K | SOT-363_SC-70-6 | U1 |
| 1 | SPF5043Z | SOT-343_SC-70-4 | U2 |
| 1 | MICRF220AYQS-TR MICRF220AYQS | QSOP-16_3.9x4.9mm_P0.635mm | U3 |
| 2 | H3-TCD-12-222X+ | Mini-Circuits_DB1627 | U4, U8 |
| 1 | NRF52810-QFAA-T nRF52810-QFxx | QFN-48-1EP_6x6mm_P0.4mm_EP4.2x4.2mm | U5 |
| 2 | AD8314ARMZ-REEL AD8314RM | MSOP-8_3x3mm_P0.65mm | U6, U7 |
| 1 | MAX7044AKA+T MAX7044AKA | TSOT-23-8_HandSoldering | U9 |
| 5 | LM358 | SOIC-8_3.9x4.9mm_P1.27mm | U10, U11, U13, U14, U15 |
| 1 | GVA-63+ GVA-63 | SOT-89-3_Handsoldering | U12 |
| 1 | TPS562208DDCR TPS562200 | SOT-23-6 | U16 |
| 1 | L327S120U11L L327S13CU11L | Crystal_SMD_3225-4Pin_3.2x2.5mm_HandSoldering | Y1 |
| 1 | X322532MOB4SI 32 MHz | Crystal_SMD_3225-4Pin_3.2x2.5mm_HandSoldering | Y2 |
| 1 | Q13FC13500004 32.768 KHz | Crystal_SMD_3215-2Pin_3.2x1.5mm | Y3 |
| 1 | 7U13560E06UCG 13.56 MHz | Crystal_SMD_3225-4Pin_3.2x2.5mm_HandSoldering | Y4 |
| 1 | BWSMA-KWE-Z3.5*4.2 | SMA_BAT_Wireless_BWSMA-KWE-Z001 | J2 |
| 2 | YG16-FL7.8-B10Ka(80)-R ~ | YG16-FL7.8-B10Ka(80)-R | J3, J4 |
| 1 | Conn_01x04_Pin | JST_PH_B4B-PH-K_1x04_P2.00mm_Vertical | J5 |
| 2 | Conn_01x01_Pin | PinSocket_1x01_P2.54mm_Vertical | J7, J8 |
| 1 | 2450AT18A100E Antenna_Chip | L_1206_3216Metric_Pad1.22x1.90mm_HandSolder | AE1 |
| 2 | BH-AAA-B5BA021 Battery_Cell | BH-AAA-B5BA021 | BT1, BT2 |
Show 38 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ST-0-102-A01-T000-LF | SW_Slide-03_Wuerth-WS-SLTV_10x2.5x6.4_P2.54mm | SW1 |
| 4 | TS-1088-AR02016 | SW_SPST_TS-1088-xR020 | SW2, SW3, SW4, SW5 |
| 1 | B59721A0100A062 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | TH1 |
| 1 | LQW18ANR10G00D 100N | L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | L1 |
| 1 | VHF160808H39NJT | L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | L2 |
| 1 | VHF160808H4N7ST 4N7 | L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | L3 |
| 1 | CS0603-2N2J-S 2N2 | L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | L4 |
| 2 | VHF160808H27NJT 27N | L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | L5, L7 |
| 1 | VHF160808H18NJT | L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | L6 |
| 1 | CMH160808B2R2MT 2U2 | L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | L8 |
| 18 | CL05A104KA5NNNC 100N | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C1, C2, C3, C4, C11, C20, C25, C28 +10 |
| 4 | CC0402JRNPO9BN681 680P | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C5, C27, C30, C44 |
| 3 | 0402B221K500NT 220P | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C6, C26, C45 |
| 4 | CC0402JRNPO9BN100 10P | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C7, C8, C32, C33 |
| 7 | TCC0402X7R102K500AT 1000P | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C9, C13, C17, C18, C22, C37, C39 |
| 2 | CL05A475MO5NUNC 4U7 | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C10, C31 |
| 1 | CL05A105KO5NNNC 1U | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C12 |
| 4 | CC0402JRNPO9BN200 20P | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C14, C15, C16, C21 |
| 1 | CC0402KRX7R8BB101 100P | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C19 |
| 1 | CC0402BRNPO9BN1R0 1P | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C23 |
| 1 | GJM1555C1H1R2WB01D 1P2 | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C24 |
| 1 | CC0402JRNPO9BN120 12P | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C40 |
| 1 | CC0402JRNPO9BN180 18P | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C41 |
| 1 | CC0402JRNPO9BN150 15P | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C42 |
| 2 | GRM155R60J226ME11D 22U | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C49, C50 |
| 2 | CL05A106MQ5NUNC 10U | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C52, C53 |
| 7 | FRC0402J103 TS 10K | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R1, R3, R7, R11, R31, R32, R35 |
| 2 | CR0402-FX-10R0GLF 10R | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R2, R14 |
| 6 | CRCW040250K0FKED 50K | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R4, R5, R6, R18, R21, R34 |
| 4 | RT0402BRD071KL 1K | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R8, R9, R10, R17 |
| 2 | RT0402BRE0750RL 50R | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R12, R16 |
| 2 | FRC0402F52R3TS 52R3 | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R13, R22 |
| 5 | RT0402BRD07100RL 100R | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R15, R27, R28, R29, R30 |
| 2 | FRC0402F91R0TS 91R | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R19, R23 |
| 1 | FRC0402J820 TS 82R | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R20 |
| 3 | CRCW04020000Z0EE 0R | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R25, R26, R33 |
| 1 | CRCW04023K30FKED 3K3 | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R36 |
| 1 | FRC0402F5101TS 5K | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R37 |
RemoteController design files
The KiCad project lives in the steewbsd/gilgamesh repository on GitHub; these links point at the commit this page was built from.
RemoteController: common questions
What microcontroller does the RemoteController use?
The RemoteController is built around the NRF52810-QFAA-T, from the Nordic nRF family.
How big is the RemoteController PCB?
The RemoteController measures 100 × 75 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the RemoteController?
132 components, from 58 distinct parts. The full bill of materials is listed on this page.
Where can I download the RemoteController design files?
From the steewbsd/gilgamesh repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the RemoteController design in my own project?
The repository has no license, so all rights stay with steewbsd. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the RemoteController without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Nordic nRF firmware against it before you order a PCB.
More boards in gilgamesh
Similar boards
Nordic nRF
Keyboard
byrantech
262.5 × 109.6 mm206 parts2LMIT4.3kNordic nRF
TOTEM
GEIGEIGEIST
258.8 × 94.4 mm85 parts2LCERN-OHL-P-2.02.0kNordic nRF
Pixl.js
solosky
40 × 23 mm45 parts4LGPL-2.01.4kNordic nRF
Board
dennisss
363 × 128 mm420 parts4LApache-2.0381Nordic nRF
Management
dennisss
101 × 31.5 mm50 parts2LApache-2.0381Nordic nRF
Board hl15-latest
dennisss
61 × 37 mm14 parts2LApache-2.0381