MMS16-Experimentierplatine
Stefan311·A7150·Exp/Platine/exp-platine.kicad_pcb
About the MMS16-Experimentierplatine PCB
MMS16-Experimentierplatine is an open source ESP32 PCB design by Stefan311, published on GitHub under the BSD-2-Clause license. It is a 2-layer board measuring 100 × 160 mm, with 69 components from 9 distinct parts.
Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the XC95144XL-TQ144 and LT1963AxST-3.3. By type, the board carries 56 connectors, 8 capacitors, 3 ICs, 1 crystal and 1 fuse.
From the project
All about the IBM-XT-Clone A7150
Main components on the MMS16-Experimentierplatine
MMS16-Experimentierplatine bill of materials (BOM)
69 components, 9 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XC95144XL-TQ144 | TQFP-144_20x20mm_P0.5mm | U1 |
| 1 | ESP32-S3-WROOM-1 | ESP32-S3-WROOM-1 | U2 |
| 1 | LT1963AxST-3.3 | SOT-223-3_TabPin2 | U3 |
| 1 | DIN41612_03x32_ABC | DIN41612_C_3x32_Male_Horizontal_THT | X1 |
| 55 | Conn_01x01_Pin | PinHeader_1x01_P2.54mm_Vertical | J1, J2, J3, J5, J6, J7, J8, J9 +47 |
| 1 | USB_B | USB_B_Lumberg_2411_02_Horizontal | J4 |
| 1 | Polyfuse | Fuse_Bourns_MF-RG300 | F1 |
| 1 | C_Polarized | C_Radial_D6.3mm_H5.0mm_P2.50mm | C1 |
| 7 | C | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C3, C4, C5, C6, C7, C8 |
MMS16-Experimentierplatine design files
The KiCad project lives in the Stefan311/A7150 repository on GitHub; these links point at the commit this page was built from.
MMS16-Experimentierplatine: common questions
What microcontroller does the MMS16-Experimentierplatine use?
The MMS16-Experimentierplatine is built around the ESP32-S3-WROOM-1, from the ESP32 family.
How big is the MMS16-Experimentierplatine PCB?
The MMS16-Experimentierplatine measures 100 × 160 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the MMS16-Experimentierplatine?
69 components, from 9 distinct parts. The full bill of materials is listed on this page.
Where can I download the MMS16-Experimentierplatine design files?
From the Stefan311/A7150 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the MMS16-Experimentierplatine design in my own project?
Yes, under the terms of its BSD-2-Clause license, which Stefan311 chose for the repository.
Can I test firmware for the MMS16-Experimentierplatine without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in A7150
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k