Pico-Lock Breakout Board
About the Pico-Lock Breakout Board
Pico-Lock Breakout Board is an open source PCB design by stellarcorp, published on GitHub under the MIT license. It is a 2-layer board measuring 46.4 × 24.5 mm, with 3 components from 3 distinct parts.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
Core software repository for the Tennessee Valley Stellar Corporation
This repository is the principal codebase for the Tennessee Valley Stellar Corporation. We are a community-scale space agency in east Tennessee dedicated to the open development of technologies enabling the public use of space.
There are three main sections to the repository. The most active development at the moment is taking place in the hal and the electronics directories. The hal directory contains the Hardware Abstraction Layer. The electronics directory holds our PCB design work. The rest of the repository (the third section) consists of older code that is in need of…
Pico-Lock Breakout Board bill of materials (BOM)
3 components, 3 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | C563982 Molex_504050-1291 Molex | Molex_504050-1291 | J1 |
| 1 | C5375652 Molex_504050-1091 Molex | Molex_504050-1091 | J2 |
| 1 | Conn_01x13_Pin | PinHeader_1x13_P2.54mm_Vertical | J6 |
Pico-Lock Breakout Board design files
The KiCad project lives in the stellarcorp/tvsc repository on GitHub; these links point at the commit this page was built from.
Pico-Lock Breakout Board: common questions
How big is the Pico-Lock Breakout Board?
The Pico-Lock Breakout Board measures 46.4 × 24.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Pico-Lock Breakout Board?
3 components, from 3 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Pico-Lock Breakout Board design files?
From the stellarcorp/tvsc repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Pico-Lock Breakout Board design in my own project?
Yes, under the terms of its MIT license, which stellarcorp chose for the repository.
More boards in tvsc
STM321s3p Battery Board
82.5 × 82.5 mm123 parts4LMIT1
STM32Magnetorquer Control Board
82.5 × 82.5 mm92 parts4LMIT1
STM32Comms Board
82.5 × 82.5 mm63 parts4LMIT1
STM32${PCB NAME}
82.5 × 82.5 mm61 parts4LMIT1
STM32Feature Bringup Board
52 × 77 mm59 parts4LMIT1
STM32Solar debug board
70.1 × 65.2 mm31 parts4LMIT1
1s battery charger
15 × 15.4 mm26 parts4LMIT1
System bus breakout board
50 × 32 mm13 parts2LMIT1
NXPCpu board teensy
82.5 × 82.5 mm12 parts2LMIT1
Magnetorquer board
77 × 96 mm10 parts4LMIT1
1s4p battery board
82.5 × 82.5 mm8 parts2LMIT1
Similar boards
134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2k
Breakout 112pin Connector
174 × 58 mm39 parts2LGPL-3.01.2k
Breakout 60pin EEC-IV
139.7 × 62.2 mm15 parts2LGPL-3.01.2k
Eecv breakout
140.8 × 53.7 mm9 parts4LGPL-3.01.2k
88 Pin Vag Breakout
142 × 58 mm91 parts2LGPL-3.01.2k
Rj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979