1s4p battery board
About the 1s4p battery board
1s4p battery board is an open source PCB design by stellarcorp, published on GitHub under the MIT license. It is a 2-layer board measuring 82.5 × 82.5 mm, with 8 components from 5 distinct parts.
Other key parts include the C5355143. By type, the board carries 4 ICs, 1 connector and 1 jumper.
It belongs with the power & battery designs in this gallery.
From the project
Core software repository for the Tennessee Valley Stellar Corporation
This repository is the principal codebase for the Tennessee Valley Stellar Corporation. We are a community-scale space agency in east Tennessee dedicated to the open development of technologies enabling the public use of space.
There are three main sections to the repository. The most active development at the moment is taking place in the hal and the electronics directories. The hal directory contains the Hardware Abstraction Layer. The electronics directory holds our PCB design work. The rest of the repository (the third section) consists of older code that is in need of…
Main components on the 1s4p battery board
1s4p battery board bill of materials (BOM)
8 components, 5 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | C5355143 1043 Keystone | BAT_1043 | U1, U2, U3, U4 |
| 1 | C563982 Molex_504050-1291 Molex | Bus Connector (Control) | J1 |
| 1 | C2915006 Conn_01x03 Wurth Elektronik | HDRV3W64P0X254_1X3_762X254X869P | JP1 |
| 1 | C50895 R50k BOURNS | Potentiometer_Bourns_3314J_Vertical | RV1 |
| 1 | C336815 10k NTC PANASONIC | Nondescript_R_0402_1005Metric | TH1 |
1s4p battery board design files
The KiCad project lives in the stellarcorp/tvsc repository on GitHub; these links point at the commit this page was built from.
1s4p battery board: common questions
How big is the 1s4p battery board?
The 1s4p battery board measures 82.5 × 82.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the 1s4p battery board?
8 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the 1s4p battery board design files?
From the stellarcorp/tvsc repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the 1s4p battery board design in my own project?
Yes, under the terms of its MIT license, which stellarcorp chose for the repository.
More boards in tvsc
STM321s3p Battery Board
82.5 × 82.5 mm123 parts4LMIT1
STM32Magnetorquer Control Board
82.5 × 82.5 mm92 parts4LMIT1
STM32Comms Board
82.5 × 82.5 mm63 parts4LMIT1
STM32${PCB NAME}
82.5 × 82.5 mm61 parts4LMIT1
STM32Feature Bringup Board
52 × 77 mm59 parts4LMIT1
STM32Solar debug board
70.1 × 65.2 mm31 parts4LMIT1
1s battery charger
15 × 15.4 mm26 parts4LMIT1
System bus breakout board
50 × 32 mm13 parts2LMIT1
NXPCpu board teensy
82.5 × 82.5 mm12 parts2LMIT1
Magnetorquer board
77 × 96 mm10 parts4LMIT1
Pico-Lock Breakout Board
46.4 × 24.5 mm3 parts2LMIT1
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0k
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7k
Display Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7k
Module 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k
TemperaturePCB PANEL
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k
ProgrammingAdapter
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1k