PS2 to USB Converter
SteveLRojas·PS2_to_USB_Converter·HW/PS2_to_USB_Converter/PS2_to_USB_Converter.kicad_pcb
About the PS2 to USB Converter PCB
PS2 to USB Converter is an open source WCH CH32/CH55x PCB design by SteveLRojas, published on GitHub under the CERN-OHL-P-2.0 license. It is a 2-layer board measuring 49.8 × 18 mm, with 26 components from 12 distinct parts.
Its main chip is the CH552G, from the WCH CH32/CH55x family. Other key parts include the MT9700. By type, the board carries 9 resistors, 5 capacitors, 4 transistors, 3 connectors, 3 diodes and 2 ICs.
It belongs with the keyboards designs in this gallery.
From the project
A converter for connecting a PS/2 keyboard to a USB host
Main components on the PS2 to USB Converter
PS2 to USB Converter bill of materials (BOM)
26 components, 12 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MT9700 | SOT-23-5 | U1 |
| 1 | CH552G | SO-16_3.9x9.9mm_P1.27mm | U2 |
| 4 | MMBT3906 | SOT-23 | Q1, Q2, Q3, Q4 |
| 1 | USB_C_Receptacle_USB2.0 | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | Conn_01x02 | PinHeader_1x02_P1.27mm_Vertical | J2 |
| 1 | Mini-DIN-6 | Connector_Mini-DIN_Female_6Pin_2rows | J3 |
| 3 | orange | LED_0805_2012Metric | D1, D2, D3 |
| 5 | 0.1u | C_0805_2012Metric | C1, C2, C3, C4, C5 |
| 2 | 5K1 | R_0805_2012Metric | R1, R2 |
| 1 | 4.7k | R_0805_2012Metric | R3 |
| 5 | 2K2 | R_0805_2012Metric | R4, R5, R6, R7, R8 |
| 1 | 10k | R_0805_2012Metric | R9 |
PS2 to USB Converter design files
The KiCad project lives in the SteveLRojas/PS2_to_USB_Converter repository on GitHub; these links point at the commit this page was built from.
PS2 to USB Converter: common questions
What microcontroller does the PS2 to USB Converter use?
The PS2 to USB Converter is built around the CH552G, from the WCH CH32/CH55x family.
How big is the PS2 to USB Converter PCB?
The PS2 to USB Converter measures 49.8 × 18 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the PS2 to USB Converter?
26 components, from 12 distinct parts. The full bill of materials is listed on this page.
Where can I download the PS2 to USB Converter design files?
From the SteveLRojas/PS2_to_USB_Converter repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the PS2 to USB Converter design in my own project?
Yes, under the terms of its CERN-OHL-P-2.0 license, which SteveLRojas chose for the repository.
Can I test firmware for the PS2 to USB Converter without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug WCH CH32/CH55x firmware against it before you order a PCB.
Similar boards
WCH CH32/CH55x
Ps2usb
rasteri
40 × 55 mm25 parts2LNo license428WCH CH32/CH55x
CH32X-48
rgoulter
224.6 × 74.2 mm112 parts2LNo license230WCH CH32/CH55x
CH552-48
rgoulter
224.6 × 74.2 mm107 parts2LNo license230WCH CH32/CH55x
CH32X-60-ANSI-Improved
rgoulter
285 × 94.2 mm149 parts2LNo license230WCH CH32/CH55x
CH32X-75
rgoulter
285 × 94.2 mm318 parts2LNo license230WCH CH32/CH55x
Webusb programmer rev6
laneboysrc
38 × 20 mm18 parts2LMIT87