33 open source boards using the MT9700
Real designs built with the MT9700, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Glider
Modos-Labs
90 × 80 mm356 parts4LCERN-OHL-S-2.02.7kESP32
EsPiFF
MDCservice
83.5 × 56 mm168 parts6LGPL-3.0224STM32
Uno
lukasloetkolben
103.2 × 74.1 mm131 parts2LMIT92My jetson nano baseboard
NVIDIA-AI-IOT
80 × 100 mm232 parts4LCustom license91STM32
Smoothiev2-prime
Smoothieware
110 × 110 mm409 parts4LNo license69Microchip SAM
T2-hardware
tessel
58.4 × 68.6 mm300 parts4LSHL-2.129HFLink
LX050724
48.5 × 33.5 mm111 parts4LApache-2.024HPM5E31 ECatDualFOC
LX050724
85 × 113 mm559 parts4LMIT14IMX6 Demo Board from REF
ts-manuel
80 × 70 mm465 parts6LGPL-3.010STM32
FailDeadly
yvoronkin
70 × 25 mm92 parts4LCustom license3AVR/Arduino
Pi super ups
mairas
65 × 56 mm86 parts2LBSD-3-Clause2Lichtenprog
cr1tbit
28 × 28 mm69 parts4LCERN-OHL-P-2.02RP2040/RP2350
Panelized-4layer
openconcepts-ar
114.6 × 70.2 mm209 parts4LCustom license1AVR/Arduino
Homegreen-Node
pmalessa
97 × 23.7 mm67 parts2LNo license1RISC-V
Alchemy
SteveLRojas
55 × 85 mm61 parts4LCERN-OHL-P-2.01ESP32
ESP32-S3-keyboard
rappepi
435 × 150 mm575 parts4LCC-BY-NC-4.00STM32
Glider
pdyxs
90 × 80 mm356 parts4LCERN-OHL-S-2.00RP2040/RP2350
FlexLogic EVB
y-suyama
100 × 100 mm306 parts6LApache-2.00STM32
CCTV3 F407 REV200
aiex718
70 × 80 mm220 parts4LNo license0RP2040/RP2350
FT2232H EVB
y-suyama
50 × 50 mm207 parts8LBSD-3-Clause0RP2040/RP2350
FlexLogicMini EVB
y-suyama
50 × 50 mm176 parts8LBSD-3-Clause0WCH CH32/CH55x
Basys3 to lb
SteveLRojas
47.2 × 69.1 mm35 parts2LCERN-OHL-P-2.00WCH CH32/CH55x
PS2 to USB Converter
SteveLRojas
49.8 × 18 mm26 parts2LCERN-OHL-P-2.00STM32
Smoothiev2-prime-2660
Smoothieware
110 × 110 mm405 parts4LNo license69I.MX6 Demo Board
ts-manuel
80 × 70 mm455 parts6LGPL-3.010RP2040/RP2350
Pcb
openconcepts-ar
69.6 × 29.4 mm154 parts4LCustom license1CCTV3 POE REV100
aiex718
70 × 50 mm56 parts4LNo license0STM32
V2 Core
Smoothieware
90 × 110 mm326 parts4LNo license69PowerCircuit
unicab369
98 × 99.9 mm420 parts2LNo license0Mess-P20+PowerCircuit
unicab369
99 × 100 mm364 parts2LNo license0RP2040/RP2350
Poly corne split42 left2
thpoll83
277.2 × 107.5 mm164 parts2LCERN-OHL-W-2.0406RP2040/RP2350
Poly corne split42 right2
thpoll83
277.2 × 107.5 mm164 parts2LCERN-OHL-W-2.0406NanoDCU
OpenKNX
17 × 18 mm25 parts2LCC-BY-NC-4.09
How designs wire the MT9700
Read from the KiCad layouts of 26 open source designs, one per repository: what each pin of the MT9700 connects to, and the resistors, capacitors and other passives placed on it.
- The SET pin has a resistor to GND on 24 of 26 designs, most often 10 kΩ (then 4.7 kΩ).
- The VOUT pin has a decoupling capacitor on 22 of 26 designs, most often 10 µF (then 100 nF).
- The VIN pin has a decoupling capacitor on 20 of 26 designs, most often 10 µF (then 100 nF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VOUTpin 1 | Connected to: 5V 58% · a signal 42% |
|
| GNDpin 2 | Connected to: GND 96% | — |
| SETpin 3 | Connected to: Signal 96% |
|
| VINpin 5 | Connected to: 5V 62% · a signal 38% |
|
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Glider by Modos-Labs, Poly corne split42 left2 by thpoll83, EsPiFF by MDCservice and Uno by lukasloetkolben.
The MT9700 in open source designs
The gallery holds 33 open source boards using the MT9700 from 26 GitHub repositories; a typical one measures about 80 × 70.2 mm and carries around 207 components.
70% use four copper layers or more, and 55% carry an open source license.
The most starred is Glider by Modos-Labs.
Parts used alongside the MT9700
Microcontrollers on boards using the MT9700
What boards using the MT9700 are built for
MT9700: common questions
Where can I find a MT9700 reference design?
Each of the 33 boards on this page is a real design using the MT9700. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the MT9700 SET pin?
The SET pin has a resistor to GND on 24 of 26 designs, most often 10 kΩ (then 4.7 kΩ). Counted from the KiCad layouts of 26 open source designs using the MT9700.
What decoupling capacitors do designs use on the MT9700 VOUT pin?
The VOUT pin has a decoupling capacitor on 22 of 26 designs, most often 10 µF (then 100 nF). Counted from the KiCad layouts of 26 open source designs using the MT9700.
What decoupling capacitors do designs use on the MT9700 VIN pin?
The VIN pin has a decoupling capacitor on 20 of 26 designs, most often 10 µF (then 100 nF). Counted from the KiCad layouts of 26 open source designs using the MT9700.
What parts are used alongside the MT9700?
The USBLC6-2P6, 93LC56BT-I, ADS1115IDGSR, FT2232HL and INA3221 appear in the most repositories here.
Which microcontrollers do boards using the MT9700 use?
Most are built on STM32 (8), RP2040/RP2350 (7), WCH CH32/CH55x (2) and ESP32 (2).
How big is a typical board using the MT9700?
The median is 80 × 70.2 mm, and 30% are two-layer designs.
What is the most popular open source board using the MT9700?
By GitHub stars, Glider by Modos-Labs, with 2,676 stars.
Can I simulate one of these boards using the MT9700 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.